BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//Saratech - ECPv6.16.4//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-WR-CALNAME:Saratech
X-ORIGINAL-URL:https://saratech.com
X-WR-CALDESC:Events for Saratech
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:America/Los_Angeles
BEGIN:DAYLIGHT
TZOFFSETFROM:-0800
TZOFFSETTO:-0700
TZNAME:PDT
DTSTART:20230312T100000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0700
TZOFFSETTO:-0800
TZNAME:PST
DTSTART:20231105T090000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0800
TZOFFSETTO:-0700
TZNAME:PDT
DTSTART:20240310T100000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0700
TZOFFSETTO:-0800
TZNAME:PST
DTSTART:20241103T090000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0800
TZOFFSETTO:-0700
TZNAME:PDT
DTSTART:20250309T100000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0700
TZOFFSETTO:-0800
TZNAME:PST
DTSTART:20251102T090000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0800
TZOFFSETTO:-0700
TZNAME:PDT
DTSTART:20260308T100000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0700
TZOFFSETTO:-0800
TZNAME:PST
DTSTART:20261101T090000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0800
TZOFFSETTO:-0700
TZNAME:PDT
DTSTART:20270314T100000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0700
TZOFFSETTO:-0800
TZNAME:PST
DTSTART:20271107T090000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20260618T110000
DTEND;TZID=America/Los_Angeles:20260618T114500
DTSTAMP:20260621T003328
CREATED:20260603T172019Z
LAST-MODIFIED:20260618T223603Z
UID:10007857-1781780400-1781783100@saratech.com
SUMMARY:Eliminate Board Respins & Accelerate Product Development with ECAD-MCAD Collaboration
DESCRIPTION:This Event Has Expired\nPlease take a look at our upcoming events to register for our next enablement session. \nJoin Saratech and Siemens EDA for an exclusive Customer Enablement Session featuring special guest speaker Alex Grange\, Technical Marketing Engineer at Siemens EDA\, and Gregory Beers\, EDA Manager at Saratech.  \nLearn how integrated ECAD-MCAD workflows between Xpedition and NX help engineering teams eliminate costly board respins\, reduce design iteration cycles\, and improve first-pass success by keeping electrical and mechanical designs synchronized throughout product development. \nKey Takeaways\nLive Workflow Demonstrations: \n\nBidirectional Design Synchronization – See how mechanical enclosure changes automatically update PCB layouts in Xpedition\, eliminating manual redraws and reducing design iteration cycles.\n3D Collision Detection and Clearance Validation – Identify component-to-enclosure interference\, heat sink conflicts\, shielding issues\, and clearance violations before manufacturing.\nConnector and Mounting Hole Alignment Verification – Validate critical connector locations\, mounting features\, and mechanical fit within the full product assembly before prototypes are built.\n\nIntegrated Collaboration Capabilities: \n\nLibrary Synchronization – Maintain alignment between electronic footprints and 3D mechanical models to ensure design consistency across disciplines.\nAutomated Design Exchange – Seamlessly exchange board geometry\, component placement\, mounting features\, and keepout zones between Xpedition and NX.\nConnected Digital Thread – Maintain design intent\, traceability\, and synchronized design data across ECAD and MCAD domains.\n\nMeet the Presenters\n\nAlex Grange\, Technical Marketing Engineer\, Siemens EDA specializes in ECAD-MCAD collaboration\, PCB design workflows\, and electronic systems design. He is a recognized expert in Xpedition-NX integration and has helped organizations improve communication between electrical and mechanical engineering teams through modern collaboration methodologies and standards-based design exchange.\nGregory Beers\, EDA Manager\, Saratech works directly with engineering organizations to implement and optimize PCB design and ECAD-MCAD collaboration workflows. With extensive experience supporting Siemens EDA solutions\, Greg helps customers reduce design iterations\, improve engineering collaboration\, and accelerate product development.\n\nDon’t miss this opportunity to see how integrated ECAD-MCAD workflows can help your team reduce design errors\, improve collaboration\, and bring products to market faster.
URL:https://saratech.com/event/eliminate-board-respins-accelerate-product-development-with-ecad-mcad-collaboration/
LOCATION:GoTo Webinar
CATEGORIES:CES
ATTACH;FMTTYPE=image/webp:https://saratech.com/wp-content/uploads/2026/06/CES-Eliminate-Board-Respins-with-ECAD-MCAD-FB-1200x630-2.webp
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20260601
DTEND;VALUE=DATE:20260605
DTSTAMP:20260621T003328
CREATED:20260331T164859Z
LAST-MODIFIED:20260604T205709Z
UID:10007855-1780272000-1780617599@saratech.com
SUMMARY:Realize LIVE 2026 – The Digital Transformation Conference
DESCRIPTION:This Event Has Expired\nPlease take a look at our upcoming events \nJoin Saratech & Siemens at Realize LIVE 2026\nGet $200 off Your Realize LIVE Full Conference Pass! Enter ‘Saratech’ in the Partner Field. \n(Select ‘Partner/Reseller’ in the ‘How did you hear about Realize LIVE?’ field\, then enter ‘Saratech’ in the Partner field.) \nRealize LIVE 2026 is Siemens’ premier digital transformation event—bringing together engineers\, leaders\, and innovators to explore how modern product development is evolving across design\, simulation\, manufacturing\, and PLM. \nAt Realize LIVE\, you’ll find more than sessions—you’ll find real-world applications of AI\, digital threads\, and connected engineering in action. It’s where ideas move beyond theory and into execution.\nAnd this year\, Saratech is showing up with purpose. \nWe’re not just attending—we’re leading sessions\, sharing insights\, and creating opportunities to connect around real engineering challenges. \nWhy You Should Attend:\n\nSee What’s Actually Working: Learn how organizations are applying Siemens solutions across engineering and manufacturing—based on real use cases\, not just concepts\nBuild Practical Skills: Take part in hands-on learning\, technical sessions\, and deep dives that you can apply directly to your workflows.\nStay Ahead of What’s Next: Explore product updates\, roadmap direction\, and emerging technologies shaping the future of digital engineering.\nConnect With the Right People: Engage with Siemens experts\, partners\, and peers who are solving similar challenges across industries.\nExperience the Ecosystem Firsthand: From live demos to the Solutions Center\, see how the full Siemens ecosystem comes together.\n\n\n\n \nWhere Saratech Comes In:\nSaratech works with engineering teams every day to implement\, optimize\, and scale Siemens solutions—and we’re bringing that real-world perspective to Realize LIVE. \nAt this year’s event\, you can: \n\nAttend Saratech-led sessions focused on practical workflows and real customer outcomes\nJoin the conversation during and after sessions—bring your questions\nConnect with our team throughout the event to compare approaches\, challenges\, and ideas\n\nWe’re there to make the event more valuable for you—not just to talk\, but to engage. \nHow to Get More Out of the Event:\nRealize LIVE moves fast. The teams that get the most value are the ones who come in with a plan—and leave with clear takeaways. \nA few ways to make it count: \n\nLook for sessions that align with your current challenges (including Saratech-led sessions)\nCome prepared with a question or problem you’re trying to solve\nake time to connect with others working through similar issues\n\nJoin a session. Start a conversation. Walk away with something useful. \nWho Should Attend:\nRealize LIVE is designed for professionals across: \n\nEngineering & Product Development\nManufacturing & Operations\nSimulation & Analysis\nPLM & Data Management\nIT & Digital Transformation Leadership\n\nIf you’re focused on improving performance\, scaling processes\, or connecting your engineering workflows\, this event is built for you.
URL:https://saratech.com/event/realize-live-2026/
LOCATION:Huntington Place\, 1 Washington Blvd\, Detroit\, MI\, 48226\, United States
CATEGORIES:Live Event
ATTACH;FMTTYPE=image/webp:https://saratech.com/wp-content/uploads/2026/03/Realize-Live-Event-2026-P-FB-1200x630-1.webp
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20260528T110000
DTEND;TZID=America/Los_Angeles:20260528T113000
DTSTAMP:20260621T003328
CREATED:20260402T232432Z
LAST-MODIFIED:20260528T181434Z
UID:10007854-1779966000-1779967800@saratech.com
SUMMARY:AI in Engineering Starts with Data: Preparing PLM for Real Intelligence
DESCRIPTION:This Event Has Expired\nPlease take a look at our upcoming events to register for our next enablement session\, or visit our on-demand learning. \nJoin us for our next Customer Enablement Session (CES) and explore why strong data foundations are critical to unlocking the real value of AI within modern engineering and product development environments. In this session\, Sassan Khoubyari\, Saratech’s Director of PLM & Digital Transformation\, will discuss how AI initiatives in engineering organizations often fall short—not because the technology isn’t powerful enough\, but because the data feeding it is incomplete\, inconsistent\, or poorly governed. As AI becomes increasingly integrated into product lifecycle management (PLM)\, success depends on having clean\, structured\, and trusted product data. Product definitions\, BOMs\, configurations\, and change histories form the digital backbone of the product lifecycle. When this data is fragmented or unreliable\, AI can amplify those issues instead of delivering meaningful insight. By establishing strong data discipline and governance\, organizations can transform AI into a powerful decision-making tool across engineering\, manufacturing\, and the supply chain. \nWhat You’ll Learn\n\nWhy AI initiatives often fail in engineering organizations and how poor data quality is the root cause\nThe role of clean\, structured\, and governed data in enabling successful AI adoption within PLM environments\nHow product definitions\, BOMs\, configurations\, and change histories form the digital record of the product\nWhy data cleanup\, organization\, and governance are essential to building reliable AI-driven insights\nPractical examples of how disciplined product data management enables AI to drive smarter engineering and operational decisions\n\nWhether you are exploring AI initiatives\, improving your PLM strategy\, or looking to strengthen your organization’s digital thread\, this session will provide practical insights into why clean data is still the foundation of successful AI. Register now to reserve your spot and learn how better data discipline can unlock the true potential of AI across your enterprise.
URL:https://saratech.com/event/ai-in-engineering-starts-with-plm/
LOCATION:GoTo Webinar
CATEGORIES:CES
ATTACH;FMTTYPE=image/webp:https://saratech.com/wp-content/uploads/2026/04/CES-AI-in-Engineering-Data-Preparing-PLM-FB-1200x630-1.webp
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20260409T110000
DTEND;TZID=America/Los_Angeles:20260409T113000
DTSTAMP:20260621T003328
CREATED:20260318T154851Z
LAST-MODIFIED:20260409T185751Z
UID:10007853-1775732400-1775734200@saratech.com
SUMMARY:Streamlining Simulation Workflows in Simcenter Femap via API Customization
DESCRIPTION:This Event Has Expired\nPlease take a look at our upcoming events to register for our next enablement session\, or visit our on-demand learning. \nJoin us for our next Customer Enablement Session (CES) on April 9 and discover how the Simcenter Femap Application Programming Interface (API) can help engineering teams automate tasks\, streamline workflows\, and unlock powerful customization capabilities within their simulation environment. In this session\, Saratech Principal Application Engineer Andy Haines will introduce the fundamentals of the Femap API and demonstrate how engineers can leverage it to improve efficiency\, reduce repetitive work\, and tailor Femap to their organization’s unique processes. \nKey Takeaways\n\nWhat an Application Programming Interface (API) is and why it matters for engineering software\nHow engineering teams can use APIs to streamline specialized workflows\, automate repetitive tasks\, and improve productivity\nWhere to find Simcenter Femap’s Integrated Development Environment (IDE) and how to access available Objects\, Methods\, and Functions\nThe benefits of using the Simcenter Femap API with non-native programming environments and languages to expand customization possibilities\nReal examples showing how these capabilities can be applied to accelerate simulation workflows and extend Femap functionality\n\nWhether you are a current Simcenter Femap user looking to increase efficiency or an engineer interested in advanced automation and customization\, this session will provide practical insight into how APIs can help your team work smarter. Register now to secure your spot and learn how to unlock the full potential of Simcenter Femap. \nAbout the Presenter\nAndy Haines is Saratech’s Principal Application Engineer with more than 25 years of experience shaping Simcenter Femap. From his early role on the original FEMAP development team to presenting new features at global user events\, Andy has been deeply involved in every aspect of the software—planning\, testing\, documentation\, training\, and customer engagement. At Saratech\, he leverages this unique expertise to help customers streamline analysis workflows\, adopt best practices\, and maximize the value of their engineering software investments.
URL:https://saratech.com/event/streamlining-simulation-workflows-via-api-customization/
LOCATION:GoTo Webinar
CATEGORIES:CES
ATTACH;FMTTYPE=image/webp:https://saratech.com/wp-content/uploads/2026/03/CES-Streamlining-Simulation-Workflows-Femap-API-FB-1200x630-1.webp
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20260319T110000
DTEND;TZID=America/Los_Angeles:20260319T113500
DTSTAMP:20260621T003328
CREATED:20260302T200059Z
LAST-MODIFIED:20260319T212957Z
UID:10007852-1773918000-1773920100@saratech.com
SUMMARY:Engineering Your Startup for Success: Resources\, Tools & Lessons From the Field
DESCRIPTION:This Event Has Expired\nPlease take a look at our upcoming events to register for our next enablement session\, or visit our on-demand learning. \nJoin Peng-Sang Cau\, Director of the Siemens for Startups Program and successful founder with a multi-million dollar exit\, for a 35-minute live session designed to help tech startups scale with confidence. \nKey Takeaways \n\nWhat Actually Makes a Startup Succeed: Insights from someone who built\, scaled\, and exited a global advanced manufacturing company.\nThe Hidden Engineering Traps That Slow Growth: Why disconnected tools\, poor data management\, and late-stage manufacturing decisions cost startups time and money.\nHow the Siemens for Startups Program Helps Founders Learn how startups gain access to enterprise-grade tools without enterprise-level overhead\, including: NX\, Teamcenter\, Simcenter\, Solid Edge\n Where Saratech Fits In: How startups accelerate growth with implementation support\, engineering services\, digital thread strategy\, and manufacturing readiness.\n\nMeet the Speaker:\nPeng-Sang Cau\nDirector\, Siemens for Startups | Founder | Angel Investor \nPeng built her company from the ground up\, scaled it globally\, and led it through a successful eight-figure acquisition. Today\, she helps deep-tech and hardware startups access the tools\, mentorship\, and ecosystem support they need to thrive. \nShe brings both founder perspective and investor insight — a rare combination.
URL:https://saratech.com/event/engineering-your-startup-for-success/
LOCATION:GoTo Webinar
CATEGORIES:Webinar
ATTACH;FMTTYPE=image/webp:https://saratech.com/wp-content/uploads/2026/03/Webinar-Engineering-Your-Startup-for-Success-FB-1200x630-v2.webp
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20260218T110000
DTEND;TZID=America/Los_Angeles:20260218T113500
DTSTAMP:20260621T003328
CREATED:20260119T192002Z
LAST-MODIFIED:20260220T002407Z
UID:10007851-1771412400-1771414500@saratech.com
SUMMARY:Accelerate Tooling Production With 3D Printing
DESCRIPTION:This Event Has Expired\nPlease take a look at our upcoming events to register for our next enablement session\, or visit our on-demand learning. \nJoin Saratech on Wednesday\, February 18\, 2026 at 11:00 AM Pacific Time for a 35-minute live webinar on how 3D printing is transforming tooling design and production. \nOur experts will show you practical ways to use additive manufacturing to speed up tooling\, from jigs and fixtures to molds and custom end-use parts. You’ll also hear real-world case studies showing how manufacturers have: \n\nReduced tooling lead time by 50% or more\nImproved tool performance and part quality\nLowered production costs with design-for-additive principles\n\nWhether you’re in aerospace\, automotive\, consumer products\, or industrial manufacturing\, you’ll leave with actionable steps you can apply immediately. \nKey Takeaways: \n\n\n\nHow to identify tooling opportunities for 3D printing\nBest practices for material selection and design\nMichael Russell\, VP of Operations from Stretch Forming Corporation (SFC)\, will share how SFC cut their tooling delivery time by 4 months (66%) with help from Saratech\n\n\n\nAbout Stretch Forming Corporation (SFC):\nStretch Forming Corporation (SFC) is an aerospace manufacturer specializing in precision-formed metal components. In this webinar\, SFC will share how partnering with Saratech enabled them to use 3D printing for custom tooling\, reducing lead times\, improving tool fit and performance\, and increasing production flexibility.
URL:https://saratech.com/event/accelerate-tooling-production-with-3d-printing/
LOCATION:GoTo Webinar
CATEGORIES:Webinar
ATTACH;FMTTYPE=image/webp:https://saratech.com/wp-content/uploads/2026/01/Webinar-Accelerate-Tooling-Production-3D-Printing-SFC-FB-1200x630-1.webp
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20251218T110000
DTEND;TZID=America/Los_Angeles:20251218T113000
DTSTAMP:20260621T003328
CREATED:20251127T000647Z
LAST-MODIFIED:20251218T192617Z
UID:10007850-1766055600-1766057400@saratech.com
SUMMARY:Mesh Optimization Techniques for Simcenter 3D Users
DESCRIPTION:This Event Has Expired\nPlease take a look at our upcoming events to register for our next enablement session\, or visit our on-demand learning. \nIf you’ve ever dealt with long solve times\, memory issues\, or unexpected crashes in Simcenter 3D\, mesh density may be the culprit. Many users unknowingly create models with extremely large node counts—slowing performance and making iterative work more difficult than it needs to be.\nJoin us on December 18 for a focused 30-minute Customer Enablement Session (CES) designed specifically for Simcenter 3D users looking to optimize their simulation workflows. \nWhat You’ll Learn\nMitchell Post will walk through key tools and best practices inside Simcenter 3D that help you: \n\nReduce mesh sizes without sacrificing accuracy\nLeverage 1D & 2D elements where appropriate instead of relying solely on dense 3D tetrahedral meshes\nIdealize and abstract geometry to streamline analysis\nSignificantly shorten solve times and reduce memory-related errors\nImprove reliability when iterating solutions\n\nYou’ll see how small modeling changes can lead to major performance gains—especially in large or complex assemblies. \nWhy Attend\n\nLearn actionable strategies you can apply immediately\nImprove simulation speed\, stability\, and efficiency\nGet insights directly from a Simcenter 3D expert\nAsk questions live during the Q&A\n\nThis CES is a great opportunity to sharpen your skills and get more value from Simcenter 3D.
URL:https://saratech.com/event/mesh-optimization-techniques-for-simcenter-3d-users/
LOCATION:GoTo Webinar
CATEGORIES:CES
ATTACH;FMTTYPE=image/webp:https://saratech.com/wp-content/uploads/2025/11/CES-Mesh-Optimization-Techniques-for-Simcenter-3D-Users-FB-1200x630-1.webp
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20251204T110000
DTEND;TZID=America/Los_Angeles:20251204T113000
DTSTAMP:20260621T003328
CREATED:20251111T195628Z
LAST-MODIFIED:20251218T192459Z
UID:10007847-1764846000-1764847800@saratech.com
SUMMARY:Explore the Latest Enhancements in Designcenter Solid Edge 2026
DESCRIPTION:This Event Has Expired\nPlease take a look at our upcoming events to register for our next enablement session\, or visit our on-demand learning. \nJoin us for a 30-minute online enablement session to see what’s new in Designcenter Solid Edge 2026. Learn how to work with large assemblies more efficiently\, leverage AI for faster design\, and tailor your environment for maximum productivity.\n \nDan Rubio\, Technical Manager at Saratech\, will walk you through:\n\nWorking smarter with AI Copilot that provides real-time guidance\, tips\, and design support.\nUsing integrated CAM and simulation tools to reduce risk and validate performance.\nAccessing browser-based tools with flexible pricing and powerful functionality.\nCustomizing your workspace with new UI options\, including Dark Theme and streamlined command bars.\nEnsuring data precision with Elysium CADFeature integration for high-fidelity data migration.\n\nYou’ll gain valuable insight into how Solid Edge 2026 helps you design faster\, work smarter\, and achieve more with every project.
URL:https://saratech.com/event/explore-the-latest-enhancements-in-designcenter-solid-edge-2026/
LOCATION:GoTo Webinar
CATEGORIES:CES
ATTACH;FMTTYPE=image/webp:https://saratech.com/wp-content/uploads/2025/11/CES-Explore-the-Latest-Enhancements-in-Designcenter-Solid-Edge-2026-FB-1200x630-1.webp
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20251120T110000
DTEND;TZID=America/Los_Angeles:20251120T114500
DTSTAMP:20260621T003328
CREATED:20251113T223615Z
LAST-MODIFIED:20251218T192322Z
UID:10007849-1763636400-1763639100@saratech.com
SUMMARY:How AI is Shaping the Future of Designcenter NX & Teamcenter
DESCRIPTION:This Event Has Expired\nPlease take a look at our upcoming events to register for our next enablement session\, or visit our on-demand learning. \nJoin us for a 45-minute online enablement session to discover how Siemens is redefining product development with next-generation AI capabilities. Learn how AI-powered tools are reshaping design workflows\, accelerating iteration cycles\, and enabling teams to collaborate and deliver with greater speed\, precision\, and creativity.\n \nOur presenter\, Shirish More\, AI Program Product Manager at Siemens\, will walk you through how Siemens’ AI strategy is reshaping engineering across the full product lifecycle\, including:\n\nDesigncenter NX: Boost mechanical design performance with Designcenter Copilot\, Select Similar\, Adaptive Command Prediction\, and Generative Design & Optimization—AI capabilities that enhance creativity\, speed\, and precision.\nTeamcenter AI: Streamline engineering data management with intelligent classification\, automated workflows\, and predictive insights that elevate decision-making and cross-team collaboration.\n\nAbout the Presenter:\nShirish More is an AI Program Product Manager within Siemens\, leading the company’s cross-segment AI strategy. He drives alignment across product\, engineering\, and business teams while shaping the roadmap for AI Copilot\, foundation models\, and emerging agentic AI capabilities across the NX and Teamcenter portfolios.\nJoin us to see how Siemens’ AI-enabled ecosystem empowers organizations to deliver higher-quality products faster—while simplifying complex engineering processes.
URL:https://saratech.com/event/how-ai-is-shaping-the-future-of-designcenter-nx-and-teamcenter/
LOCATION:GoTo Webinar
CATEGORIES:CES
ATTACH;FMTTYPE=image/webp:https://saratech.com/wp-content/uploads/2025/11/CES-How-AI-is-Shaping-the-Future-of-Designcenter-NX-and-Teamcenter-FB-1200x630-1.webp
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20251106T110000
DTEND;TZID=America/Los_Angeles:20251106T113000
DTSTAMP:20260621T003328
CREATED:20251021T235222Z
LAST-MODIFIED:20251112T004018Z
UID:10007846-1762426800-1762428600@saratech.com
SUMMARY:Boost Design Productivity with NX Part Families
DESCRIPTION:This Event Has Expired\nPlease take a look at our upcoming events to register for our next enablement session\, or visit our on-demand learning.\nJoin us for a 30-minute online enablement session to learn how to streamline part variant creation and reuse in Siemens NX using Part Families. This session is ideal for designers\, CAD admins\, and engineers looking to save time\, reduce errors\, and build scalable libraries.\n \nAllison Maynard\, Mechanical Engineer at Saratech will walk you through:\n\nUsing Expressions and Attributes to control dimensions and features\nCreating your First Standard Part as a master template\nAutomating Part Family Generation\nOrganizing and deploying to the NX Reuse Library\n\nYou’ll gain practical tips\, live demonstrations\, and have the opportunity to ask questions directly to Allison\, our NX expert.
URL:https://saratech.com/event/boost-design-productivity-with-nx-part-families/
LOCATION:GoTo Webinar
CATEGORIES:CES
ATTACH;FMTTYPE=image/webp:https://saratech.com/wp-content/uploads/2025/10/CES-Boost-Design-Productivity-with-NX-Part-Families-FB-1200x630-1.webp
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20251002T110000
DTEND;TZID=America/Los_Angeles:20251002T113000
DTSTAMP:20260621T003328
CREATED:20250922T224421Z
LAST-MODIFIED:20251112T004126Z
UID:10007845-1759402800-1759404600@saratech.com
SUMMARY:What’s New in Simcenter Femap with Andy Haines
DESCRIPTION:This Event Has Expired\nPlease take a look at our upcoming events to register for our next enablement session\, or visit our on-demand learning.\nJoin us for our next Customer Enablement Session and learn about the exciting new features in Simcenter Femap! Discover how this new version of Femap makes engineering simulations more accurate than ever before.\n \nOur expert speaker\, Andy Haines\, will guide you through the latest enhancements\, including:\n\nTeamcenter Integration from a high level\nUnified Graphics Architecture – What it is and why it is so important\nNew options and operations in the Meshing Toolbox\nZONA integration – New Entity Types\, Analysis Type\, and Analysis Set Manager options\nOutput Tables used to store chartable data within individual Analysis Studies\nCloud licensing and Chat functionality\n\n \nYou’ll learn how these scalable solutions help you:\n\nSimplify design and manufacturing data exchange.\nImprove traceability across your supply chain.\nAccelerate product development cycles.\nDeploy collaboration tools strategically for maximum business impact.\n\nDon’t miss this opportunity to see how Simcenter Femap can help you tackle even the most challenging engineering simulations. Register now to secure your spot. \nWhether you are a current user of Simcenter Femap or are new to the software\, this session will provide valuable insights and information on the latest capabilities and improvements in the software.\n \nAbout the Presenter:\nAndy Haines is Saratech’s Principal Application Engineer with more than 25 years of experience shaping Simcenter Femap. From his early role on the original FEMAP development team to presenting new features at global user events\, Andy has been deeply involved in every aspect of the software—planning\, testing\, documentation\, training\, and customer engagement. At Saratech\, he leverages this unique expertise to help customers streamline analysis workflows\, adopt best practices\, and maximize the value of their engineering software investments.
URL:https://saratech.com/event/whats-new-in-simcenter-femapwhats-new-in-simcenter-femap-with-andy-haines/
LOCATION:GoTo Webinar
CATEGORIES:CES
ATTACH;FMTTYPE=image/webp:https://saratech.com/wp-content/uploads/2025/09/CES-Whats-New-in-Simcenter-Femap-FB-1200x630-2.webp
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20250923T100000
DTEND;TZID=America/Los_Angeles:20250923T120000
DTSTAMP:20260621T003328
CREATED:20250904T214620Z
LAST-MODIFIED:20251112T003253Z
UID:10007843-1758621600-1758628800@saratech.com
SUMMARY:Technology Showcase at UCI: Explore  Markforged FX10 & FX20 3D Printers
DESCRIPTION:This Event Has Expired\nPlease take a look at our upcoming events to register for our next enablement session. \nTechnology Showcase at UCI: Explore Markforged FX10 & FX20 3D Printers – September 23\n\nJoin us on Tuesday\, September 23\, 2025\, at 10:00 AM at UC Irvine’s 3D Printing Lab for a technology showcase live event featuring the Markforged FX10 and FX20 3D printers—the most advanced systems for high-strength composite and metal 3D printing. Learn about this ground-breaking technology and how companies in various industries including Aerospace\, Automotive\, and Equipment Manufacturing use it to stay ahead of their competitors. \nDuring the Event You’ll:\n\nSee the FX10 and FX20 live in action\nHandle real parts printed in composites and metals\nSpeak directly with Markforged experts about applications in your industry\nLearn how leading manufacturers reduce lead times\, cut costs\, and increase part performance with Markforged technology\n\nGet Your Hands On:\nFX10 – The Versatile Production Workhorse \n\nPrint both continuous fiber-reinforced composites and metal parts\nAchieve exceptional surface finish\, precision\, and part strength\nDesigned for reliable\, repeatable production of high-performance end-use components\n\nFX20 – The Ultimate Industrial 3D Printer \n\nCreate large\, aerospace-grade parts with unmatched strength\nPrint with ULTEM™ 9085 filament reinforced with continuous carbon fiber\nBoasts a spacious 525 x 400 x 400 mm build volume and a heated chamber up to 200°C\, enabling production of parts that withstand extreme environments\n\nPlus\, schedule a 1-on-1 meeting after the event to: \n\nDiscuss your specific projects\nHave your parts evaluated to see if they’re a fit for composite or metal 3D printing\n\nDon’t miss this chance to explore how these groundbreaking 3D printers can transform your production process!  \nLunch will be served. We can’t wait to see you there!
URL:https://saratech.com/event/technology-showcase-uci-markforged-fx10-fx20-3d-printers/
LOCATION:UC Irvine 3D Printing Lab\, Irvine\, CA\, 92697\, United States
CATEGORIES:Live Event
ATTACH;FMTTYPE=image/webp:https://saratech.com/wp-content/uploads/2025/09/Tech-Showcase-Live-UCI-FX10-FX20-v2-FB-1200x630-1.webp
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20250918T110000
DTEND;TZID=America/Los_Angeles:20250918T113000
DTSTAMP:20260621T003328
CREATED:20250909T001754Z
LAST-MODIFIED:20251112T003737Z
UID:10007844-1758193200-1758195000@saratech.com
SUMMARY:From Bottlenecks to Breakthroughs: Supplier Collaboration with Teamcenter
DESCRIPTION:This Event Has Expired\nPlease take a look at our upcoming events to register for our next enablement session\, or visit our on-demand learning. \nSecurely share design and manufacturing data with suppliers and customers. \nStruggling with disconnected supplier communication\, version conflicts\, or data security concerns? Join Sassan Khoubyari\, Director of Digital Transformation at Saratech\, for an exclusive online session to see how Siemens Teamcenter empowers organizations to streamline supplier and customer collaboration while ensuring compliance and security. \nIn this presentation\, you’ll discover:\n\nPartner Connect: Deep integration for strategic partners.\nSupplier Connect: Secure\, web-based collaboration with Tier 2 and Tier 3 suppliers.\nXcelerator Share: Lightweight\, cloud-based file exchange.\n\nYou’ll learn how these scalable solutions help you:\n\nSimplify design and manufacturing data exchange.\nImprove traceability across your supply chain.\nAccelerate product development cycles.\nDeploy collaboration tools strategically for maximum business impact.\n\nDon’t miss this opportunity to learn how to select the right solution for your supplier collaboration needs and drive faster\, smarter innovation. \nAbout the Presenter:\nSassan Khoubyari has over 25 years of experience in digital strategy\, PLM\, and IT leadership across global product development operations. \nBefore joining Saratech\, Sassan led the PLM engineering and manufacturing implementation for HondaJet in North Carolina. He also served as IT Director at Space Systems/Loral\, a satellite manufacturing company in Palo Alto\, and spent over a decade leading Ford’s Powertrain C3PNG implementation. \nHe holds a B.S. and M.S. in Mechanical Engineering\, as well as an Executive MBA from the University of Michigan’s Ross School of Business. \nRegister Now!
URL:https://saratech.com/event/from-bottlenecks-to-breakthroughs-supplier-collaboration-with-teamcenter/
LOCATION:GoTo Webinar
CATEGORIES:CES
ATTACH;FMTTYPE=image/webp:https://saratech.com/wp-content/uploads/2025/09/CES-From-Bottlenecks-to-Breakthroughs-Supplier-Collaboration-with-Teamcenter-FB-1200x630-1.webp
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20250821T110000
DTEND;TZID=America/Los_Angeles:20250821T113000
DTSTAMP:20260621T003328
CREATED:20250703T180438Z
LAST-MODIFIED:20250903T163004Z
UID:10000081-1755774000-1755775800@saratech.com
SUMMARY:Expedite Concept to Manufacture: Maximizing WAVE for Ultimate Collaboration\, Accuracy\, & Speed
DESCRIPTION:This Event Has Expired\nPlease take a look at our upcoming events to register for our next enablement session. \nJoin Matt Ostmeyer\, Senior NX Application Engineer at Saratech\, for an exclusive Customer Enablement Session on accelerating your concept-to-manufacture process with WAVE. \nUsing NX and Teamcenter\, see how leading teams develop complex assemblies faster and with greater accuracy by leveraging upstream and downstream WAVE linking. Discover how to navigate complex iterative design cycles with freedom and speed\, enabling real-time collaboration with engineering\, production\, and planning partners. \nGain practical strategies to share preliminary concepts earlier\, improving decision-making and delivering better outcomes with fewer iterations. \nKey Takeaways\n\nReference Model for Design Approval: Rapidly iterate and transport approved concept models to a production-ready master model\, fully prepared for collaborative detailing.\nPreliminary BOM Before Development: Build accurate\, consistent assembly structures sooner\, benefiting the team throughout the product lifecycle.\nCase Study Success: See how a digital twin was achieved 60% faster than traditional methods\, with superior accuracy for direct-to-market success.\n\nDon’t miss one of the most popular sessions at this year’s Realize Live Conference. \nAbout the Presenter: Matt Ostmeyer\, Senior NX Application Engineer at Saratech.  Matt Ostmeyer holds a BFA in Industrial Design from the University of Kansas. He helps customers unlock the full potential of Siemens software for greater efficiency and precision. Matt brings extensive experience in recreational marine design\, composites\, and electric propulsion systems for boats\, off-road vehicles\, and urban transit—giving him a unique perspective on streamlining design-to-manufacture processes. \n\n\n \n\nWatch this CES
URL:https://saratech.com/event/expedite-concept-to-manufacture-maximizing-wave-for-ultimate-collaboration-accuracy-and-speed/
LOCATION:GoTo Webinar
CATEGORIES:CES
ATTACH;FMTTYPE=image/webp:https://saratech.com/wp-content/uploads/2025/07/CES-Expedite-Concept-to-Manufacture-Maximizing-WAVE-for-Ultimate-Collaboration-Accuracy-and-Speed-FB-1200x630-1.webp
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20250807
DTEND;VALUE=DATE:20250822
DTSTAMP:20260621T003328
CREATED:20250522T205158Z
LAST-MODIFIED:20251112T003909Z
UID:10000077-1754524800-1755820799@saratech.com
SUMMARY:Case Study: Building a Digital Thread Across Design\, Simulation & Manufacturing Session: 2 On-Demand
DESCRIPTION:This Event Has Expired\nPlease take a look at our upcoming events to register for our next enablement session\, or visit our on-demand learning. \nJoin Saratech for an on-demand session showcasing part II of a real digital thread implementation using Siemens NX\, Simcenter\, and CAM. \nPresenter: Mark Anderson\, Manager of Manufacturing Solutions at Saratech \nWhat You Will Learn: \n\nHow to connect design\, simulation\, and manufacturing workflows\nIncrease efficiency with NX CAM stage modeling\nSpeed up NC programming and CMM inspection\n\nWho Should Attend: \n\nDesign and Manufacturing Engineers\nCAM Programmers & NC Planners\nEngineering Managers exploring digital transformation\n\nBonus: All attendees will receive a Digital Thread e-Book post-event. \nWhen: August 7 – 21 \nDon’t miss this opportunity to stay ahead of the curve with the latest advancements in Teamcenter. \nSaratech Customer Enablement Series (CES) is a bi-monthly\, web-based learning program designed to help engineers\, designers\, and Siemens Digital Industries Software users get the most out of their CAD\, CAM\, CAE\, PLM software.
URL:https://saratech.com/event/case-study-building-a-digital-thread-across-design-simulation-manufacturing-session-2/
LOCATION:GoTo Webinar
CATEGORIES:On Demand Webinar
ATTACH;FMTTYPE=image/webp:https://saratech.com/wp-content/uploads/2025/05/CES-Building-a-Digital-Thread-Part-2-On-Demand-Session-FB-1200x630-1.webp
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20250724T100000
DTEND;TZID=America/Los_Angeles:20250724T120000
DTSTAMP:20260621T003328
CREATED:20250707T222426Z
LAST-MODIFIED:20250903T163542Z
UID:10000082-1753351200-1753358400@saratech.com
SUMMARY:The Future of Industrial 3D Printing: Explore Markforged FX10 & FX20 3D Printers
DESCRIPTION:This Event Has Expired\nPlease take a look at our upcoming events. \nExplore Industrial 3D Printing with the Markforged FX10 & FX20 – July 24\n\nJoin us on Thursday\, July 24\, 2025\, at 10:00 AM at UC Irvine’s 3D Printing Lab for an exclusive live event showcasing the Markforged FX10 and FX20 3D printers—the most advanced systems for high-strength composite and metal 3D printing. \nLearn about this ground-breaking technology and how companies in various industries including Aerospace\, Automotive\, and Equipment Manufacturing use it to stay ahead of their competitors. \nDuring the Event You’ll:\n\nSee the FX10 and FX20 live in action\nHandle real parts printed in composites and metals\nSpeak directly with Markforged experts about applications in your industry\nLearn how leading manufacturers reduce lead times\, cut costs\, and increase part performance with Markforged technology\n\nGet Your Hands On:\nFX10 – The Versatile Production Workhorse \n\nPrint both continuous fiber-reinforced composites and metal parts\nAchieve exceptional surface finish\, precision\, and part strength\nDesigned for reliable\, repeatable production of high-performance end-use components\n\nFX20 – The Ultimate Industrial 3D Printer \n\nCreate large\, aerospace-grade parts with unmatched strength\nPrint with ULTEM™ 9085 filament reinforced with continuous carbon fiber\nBoasts a spacious 525 x 400 x 400 mm build volume and a heated chamber up to 200°C\, enabling production of parts that withstand extreme environments\n\nPlus\, schedule a 1-on-1 meeting after the event to: \n\nDiscuss your specific projects\nHave your parts evaluated to see if they’re a fit for composite or metal 3D printing\n\nDon’t miss this chance to explore how these groundbreaking 3D printers can transform your production process!  \nLunch will be served. We can’t wait to see you there!
URL:https://saratech.com/event/future-of-industrial-3d-printing-explore-markforged-fx10-fx20/
LOCATION:UC Irvine 3D Printing Lab\, Irvine\, CA\, 92697\, United States
CATEGORIES:Live Event
ATTACH;FMTTYPE=image/webp:https://saratech.com/wp-content/uploads/2025/07/Live-Event-Future-of-Industrial-3D-Printing-Markforged-FX10-FX20-FB-1200x630-1.webp
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20250717T110000
DTEND;TZID=America/Los_Angeles:20250717T113000
DTSTAMP:20260621T003329
CREATED:20250701T231328Z
LAST-MODIFIED:20250903T234950Z
UID:10000079-1752750000-1752751800@saratech.com
SUMMARY:Connecting the Dots: Digitally Linking the dBOM\, eBOM\, & mBOM
DESCRIPTION:This Event Has Expired\nPlease take a look at our upcoming events to register for our next enablement session. \nIn this session\, Madison Rye\, VP of PLM & Application Engineering at Saratech\, will explore how the digital thread enhances Bill of Materials (BOM) management by digitally connecting the design BOM\, engineering BOM\, and manufacturing BOM.  Through practical examples\, we will demonstrate why having separate but digitally connected design\, engineering\, and manufacturing BOMs is critical\, and how this connection ensures seamless communication\, reduces errors\, and accelerates product development cycles. \nKey Takeaways\n\nAttendees will learn why having separate design\, engineering\, and manufacturing BOMs is critical\nAttendees will learn the benefits of digitally connecting these BOMs\nAttendees will learn how to get started with digitally connected BOM management\n\nDon’t miss the chance to see one of the most popular sessions at Realize Live this year. \nSaratech Customer Enablement Series (CES) is a bi-monthly\, web-based learning program designed to help engineers\, designers\, and Siemens Digital Industries Software users get the most out of their CAD\, CAM\, CAE\, PLM software.\n\n\n \n\nWatch this CES
URL:https://saratech.com/event/connecting-the-dots-digitally-linking-the-dbom-ebom-and-mbom/
LOCATION:GoTo Webinar
CATEGORIES:CES
ATTACH;FMTTYPE=image/webp:https://saratech.com/wp-content/uploads/2025/07/CES-Connecting-the-dots-digitally-linking-the-dBOM-eBOM-and-mBOM-FB-1200x630-1.webp
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20250703T110000
DTEND;TZID=America/Los_Angeles:20250703T113000
DTSTAMP:20260621T003329
CREATED:20250619T234406Z
LAST-MODIFIED:20250903T234828Z
UID:10000078-1751540400-1751542200@saratech.com
SUMMARY:From Complexity to Clarity: How Teamcenter AI & Copilot Transform Product Development
DESCRIPTION:This Event Has Expired\nPlease take a look at our upcoming events to register for our next enablement session. \nJoin Sassan Khoubyari\, Director of Digital Transformation at Saratech\, for an in-depth look at how Siemens Teamcenter AI and Copilot are reshaping the future of product development. Learn how these technologies are helping teams analyze\, optimize\, and make decisions faster—turning industrial data into actionable insight. \nWhat You Will Learn: \n\nHow Teamcenter AI and Copilot accelerate decision-making\nThe role of generative AI and digital twins in modern development\nReal-world use cases across industries\nHow to turn complexity into clarity with a scalable digital strategy\nHow Saratech can support your AI and PLM journey\n\nWho Should Attend: \nThis session is ideal for professionals in: \n\nProduct development\nEngineering\nDesign and innovation\nPLM and IT strategy\n\nAbout the Presenter: \nSassan Khoubyari has over 25 years of experience in digital strategy\, PLM\, and IT leadership across global product development operations. \nBefore joining Saratech\, Sassan led the PLM engineering and manufacturing implementation for HondaJet in North Carolina. He also served as IT Director at Space Systems/Loral\, a satellite manufacturing company in Palo Alto\, and spent over a decade leading Ford’s Powertrain C3PNG implementation. \nHe holds a B.S. and M.S. in Mechanical Engineering\, as well as an Executive MBA from the University of Michigan’s Ross School of Business. \nDon’t miss this opportunity to stay ahead of the curve with the latest advancements in Teamcenter. \nSaratech Customer Enablement Series (CES) is a bi-monthly\, web-based learning program designed to help engineers\, designers\, and Siemens Digital Industries Software users get the most out of their CAD\, CAM\, CAE\, PLM software.\n\n\n \n\nWatch this CES
URL:https://saratech.com/event/from-complexity-to-clarity-how-teamcenter-ai-copilot-transform-product-development/
LOCATION:GoTo Webinar
CATEGORIES:CES
ATTACH;FMTTYPE=image/webp:https://saratech.com/wp-content/uploads/2025/06/CES-Teamenter-AI-Copilot-FB-1200x630-web.webp
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20250605T110000
DTEND;TZID=America/Los_Angeles:20250605T113000
DTSTAMP:20260621T003329
CREATED:20250522T185037Z
LAST-MODIFIED:20250903T234720Z
UID:10000076-1749121200-1749123000@saratech.com
SUMMARY:Case Study: Building a Digital Thread Across Design\, Simulation & Manufacturing Session: 1
DESCRIPTION:This Event Has Expired\nPlease take a look at our upcoming events to register for our next enablement session. \nJoin Saratech for a two-part live session showcasing a real digital thread implementation using Siemens NX\, Simcenter\, and CAM. \nPresenter: Mark Anderson\, Manager of Manufacturing Solutions at Saratech \nWhat You Will Learn: \n\nHow to connect design\, simulation\, and manufacturing workflows\nIncrease efficiency with NX CAM stage modeling\nSpeed up NC programming and CMM inspection\n\nWho Should Attend: \n\nDesign and Manufacturing Engineers\nCAM Programmers & NC Planners\nEngineering Managers exploring digital transformation\n\nBonus: All attendees will receive a Digital Thread e-Book post-event. \nSession 1: June 5 \nSession 2: June 19 \nStart Time: 11:00 a.m. Pacific Time \nDon’t miss this opportunity to stay ahead of the curve with the latest advancements in Teamcenter. \nSaratech Customer Enablement Series (CES) is a bi-monthly\, web-based learning program designed to help engineers\, designers\, and Siemens Digital Industries Software users get the most out of their CAD\, CAM\, CAE\, PLM software.\n\n\n \n\nWatch this CES
URL:https://saratech.com/event/case-study-building-a-digital-thread-across-design-simulation-manufacturing-1/
LOCATION:GoTo Webinar
CATEGORIES:CES
ATTACH;FMTTYPE=image/webp:https://saratech.com/wp-content/uploads/2025/05/CES-Building-a-Digital-Thread-Design-Simulation-Manufacturing-FB-1200x630-1.webp
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20250602
DTEND;VALUE=DATE:20250606
DTSTAMP:20260621T003329
CREATED:20250408T160733Z
LAST-MODIFIED:20250903T234526Z
UID:10000073-1748822400-1749167999@saratech.com
SUMMARY:Realize LIVE – The Digital Transformation Conference
DESCRIPTION:This Event Has Expired\nPlease take a look at our upcoming events. \nJoin Saratech & Siemens at Realize LIVE – The Digital Transformation Conference\nThis premier event brings together over 2\,500 experts\, leaders\, and partners across industries for four days of learning\, connection\, and innovation. With 450+ sessions focused on AI\, digitization\, sustainability\, and optimization across the product lifecycle\, Realize LIVE is the place to see how digital transformation becomes reality—fast. Gain powerful insights\, build new skills\, and engage with the Siemens software community like never before. \nWhy You Should Attend:\n\nAccelerate Your Digital Transformation Journey: Learn from experts and industry leaders\, sharpen your skills\, and discover emerging trends and technologies with 400+ sessions.\nBecome a Better User: 85% of attendees leave with new skills and improved tool proficiency—giving you an edge in your daily work.\nGet Inspired by Thought Leaders: Hear directly from customers and innovators leading over 70% of sessions\, sharing real-world experiences and breakthroughs.\nStay Ahead With Product Roadmaps: Preview the latest advancements and updates in Siemens technology to stay competitive and plan for the future.\nGain Exclusive Hands-on Training & Certification: Access complimentary hands-on training\, 60 days of Siemens Xcelerator Academy\, 20 lab hours\, and earn your Siemens Xcelerator Certification (a $1150 value).\nConnect and Celebrate With Product Experts: Join portfolio meet-ups\, industry receptions\, and community events\, and don’t miss the unforgettable Realize LIVE celebration.\nDive Into the Siemens Ecosystem: Explore live demos\, engage with partners\, and meet Siemens experts at the Solutions Center—your destination for all things digital transformation.\n\nWho Should Attend:\nRealize LIVE is designed for professionals across engineering\, manufacturing\, product lifecycle management\, design\, and IT/software administration. Whether you’re a user\, industry expert\, or technology partner\, this is your opportunity to network\, learn best practices\, and stay ahead of the latest trends and innovations. If you’re looking to accelerate your digital transformation\, sharpen your skills\, and connect with the Siemens community\, this event is for you.
URL:https://saratech.com/event/realize-live-the-digital-transformation-conference/
LOCATION:Huntington Place\, 1 Washington Blvd\, Detroit\, MI\, 48226\, United States
CATEGORIES:Live Event
ATTACH;FMTTYPE=image/webp:https://saratech.com/wp-content/uploads/2025/04/Realize-Live-Event-1200x630-1.webp
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20250515T110000
DTEND;TZID=America/Los_Angeles:20250515T113000
DTSTAMP:20260621T003329
CREATED:20250501T213355Z
LAST-MODIFIED:20250903T171504Z
UID:10000075-1747306800-1747308600@saratech.com
SUMMARY:What's New in Teamcenter 2412
DESCRIPTION:This Event Has Expired\nPlease take a look at our upcoming events to register for our next enablement session. \nExplore the latest enhancements in Teamcenter 2412 with Michelle Simon\, Saratech’s Application Engineer and Teamcenter expert. Discover new useful features to manage your engineering data. \nWhat You Will Learn: \n\nNew updates on DC\, UI\, User Permissions and Search\nWorkflows and BOM enhancements\nUpdates on Reporting and Customization\nAdditional Active Workspace functionalities\n\nWho Should Attend: \n\nDesigners and Engineers currently using Teamcenter\nTeamcenter Admins and IT team supporting Teamcenter\nAnyone interested in learning more about Teamcenter\n\nDon’t miss this opportunity to stay ahead of the curve with the latest advancements in Teamcenter. \nSaratech Customer Enablement Series (CES) is a bi-monthly\, web-based learning program designed to help engineers\, designers\, and Siemens Digital Industries Software users get the most out of their CAD\, CAM\, CAE\, PLM software.\n\n\n \n\nWatch this CES
URL:https://saratech.com/event/whats-new-in-teamcenter-2412/
LOCATION:GoTo Webinar
CATEGORIES:CES
ATTACH;FMTTYPE=image/webp:https://saratech.com/wp-content/uploads/2025/05/CES-Whats-New-in-Teamcenter-2412-FB-1200x630-1.webp
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20250501T110000
DTEND;TZID=America/Los_Angeles:20250501T113000
DTSTAMP:20260621T003329
CREATED:20250421T203036Z
LAST-MODIFIED:20250903T165650Z
UID:10000074-1746097200-1746099000@saratech.com
SUMMARY:Useful NX Tips You May Have Missed
DESCRIPTION:This Event Has Expired\nPlease take a look at our upcoming events to register for our next enablement session. \nFor those unable to join us at the recent Siemens DISW Users meeting\, Matt Ostmeyer\, Saratech Senior NX Application Engineer\, will share the latest tips and tricks for NX users. This was the most popular session at the event. In 30 minutes\, Matt will reveal key tips on surfacing\, splines\, wave workflows\, reference models and more. \nJoin us live to learn and more importantly\, get your NX questions answered by our expert. This will be a valuable session for engineers\, designers\, and anyone looking to get the most out of NX. Don’t miss this opportunity to explore useful features of NX and learn tips that will save you time and reduce frustrations. \nSaratech Customer Enablement Series (CES) is a bi-monthly\, web-based learning program designed to help engineers\, designers\, and Siemens Digital Industries Software users get the most out of their CAD\, CAM\, CAE\, PLM software.\n\n\n \n\nWatch this CES
URL:https://saratech.com/event/useful-nx-tips-you-may-have-missed/
LOCATION:GoTo Webinar
CATEGORIES:CES
ATTACH;FMTTYPE=image/webp:https://saratech.com/wp-content/uploads/2025/04/CES-Useful-NX-Tips-You-May-Have-Missed-FB-1200x630-1.webp
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20250417T110000
DTEND;TZID=America/Los_Angeles:20250417T113000
DTSTAMP:20260621T003329
CREATED:20250214T184014Z
LAST-MODIFIED:20250903T165149Z
UID:10000069-1744887600-1744889400@saratech.com
SUMMARY:Exploring NX X: Cloud-Based CAD with Built-in AI & Collaboration Tools
DESCRIPTION:This Event Has Expired\nPlease take a look at our upcoming events to register for our next enablement session. \nNX X is transforming product design with a cloud-based CAD experience that enhances flexibility\, collaboration\, and efficiency. In this CES (Customer Enablement Session)\, Saratech Co-op Application Engineering Manager Matt Rataiczak will demonstrate how NX X’s built-in AI assistance\, seamless data management\, and easy onboarding empower engineering teams to work smarter and faster—anytime\, anywhere. \nWhy You Should Attend:\n\nLearn what NX X is and how it differs from traditional NX\nExplore AI-powered Co-Pilot features that enhance design efficiency\nUnderstand NX X’s collaboration and built-in data management capabilities\nGet insights into onboarding and licensing options\n\nWhat To Expect:\n\nIntroduction to NX X and its key advantages\nOverview of AI-driven Co-Pilot for smarter design\nCollaboration tools and cloud-based data management\nNX X onboarding process and licensing options\nLive Q&A session\n\nWho Should Attend:\n\nEngineers and designers looking for cloud-based CAD solutions\nProduct development teams needing enhanced collaboration tools\nIT and PLM professionals evaluating cloud-based software options\n\nDon’t miss this opportunity to explore the future of CAD with NX X and learn how it can streamline your design processes.\n\n\n \n\nWatch this CES
URL:https://saratech.com/event/exploring-nx-x-ces/
LOCATION:GoTo Webinar
CATEGORIES:CES
ATTACH;FMTTYPE=image/jpeg:https://saratech.com/wp-content/uploads/2025/02/FB-1200x630-CES-Exploring-NX-X-2.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20250416T090000
DTEND;TZID=America/Los_Angeles:20250416T150000
DTSTAMP:20260621T003329
CREATED:20250219T202720Z
LAST-MODIFIED:20250903T165008Z
UID:10000070-1744794000-1744815600@saratech.com
SUMMARY:Siemens DISW Regional Users Club – Hosted by Saratech
DESCRIPTION:This Event Has Expired\nPlease take a look at our upcoming events. \nJoin Us for the Siemens DISW Regional Users Club!\nSaratech is excited to host the Siemens DISW Regional Users Club in Costa Mesa\, CA! This exclusive in-person event is designed for Siemens users and managers to gain valuable insights\, exchange ideas\, and explore the latest innovations in digital transformation\, NX\, Teamcenter\, PLM practices\, and manufacturing with NX CAM. \nWhy You Should Attend:\n\nSiemens Keynote Presentation: Learn how digital threads can boost profitability\nHands-On Insights: Discover best practices for design reviews\, BOM management\, and PLM alignment\nNX & Teamcenter Updates: Explore the future of AI in NX\, visualization advancements\, and key PLM innovations\nIndustry Perspectives: Hear from leading companies and industry experts on real-world applications\n\nWho Should Attend:\nThis event is perfect for Siemens users and managers looking to deepen their understanding of digital transformation\, NX design\, PLM administration\, BOM management\, and advanced manufacturing techniques. \nStay ahead of the competition by networking with industry experts\, learning about the latest Siemens solutions\, and gaining actionable strategies to enhance your business operations.
URL:https://saratech.com/event/siemens-disw-ruc-hosted-by-saratech/
LOCATION:Siemens Costa Mesa Office\, 535 Anton Blvd\, Costa Mesa\, CA\, 92626\, United States
CATEGORIES:Live Event
ATTACH;FMTTYPE=image/jpeg:https://saratech.com/wp-content/uploads/2025/02/FB-1200x630-LIVE-EVENT-RUC.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20250403T110000
DTEND;TZID=America/Los_Angeles:20250403T113000
DTSTAMP:20260621T003329
CREATED:20250312T200753Z
LAST-MODIFIED:20250903T164850Z
UID:10000072-1743678000-1743679800@saratech.com
SUMMARY:Understanding Licensing in Solid Edge
DESCRIPTION:This Event Has Expired\nPlease take a look at our upcoming events to register for our next enablement session. \nLicensing in Solid Edge is evolving\, and these changes could impact how you manage your software access. Join us for an insightful Customer Enablement Session (CES) with Daniel Rubio\, Technical Manager at Saratech\, to break down the latest licensing updates and explore the best options for your organization. \nWhy You Should Attend:\n\nUnderstand how recent licensing changes impact Solid Edge users\nLearn the differences between Node-Locked\, Floating\, and Named-User Cloud Licensing\nExplore options for adapting to licensing updates\, including license borrowing and Solid Edge X\n\nWhat To Expect:\n\nGeneral Licensing Overview – Learn how to evaluate a license file and update your Siemens License Server\nRecent Licensing Changes – Get details on the removal of Home/Travel licenses and changes to cloud-based licensing\nOptions for Moving Forward – Discover the best approach for your business\, whether it’s VPN access\, floating licenses\, or upgrading to Solid Edge X\nLive Q&A – Ask your questions directly to Daniel Rubio and get expert guidance\n\nWho Should Attend:\n\nSolid Edge users looking to navigate licensing updates\nIT professionals managing software licensing for engineering teams\nBusiness leaders seeking the best licensing approach for their teams\n\nDon’t miss this opportunity to gain clarity on Solid Edge licensing and make informed decisions for your business.\n\n\n \nWatch this CES
URL:https://saratech.com/event/understanding-licensing-in-solid-edge/
LOCATION:GoTo Webinar
CATEGORIES:CES
ATTACH;FMTTYPE=image/jpeg:https://saratech.com/wp-content/uploads/2025/03/FB-1200x630-CES-Understanding-Licensing-in-Solid-Edge.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20250320T110000
DTEND;TZID=America/Los_Angeles:20250320T113000
DTSTAMP:20260621T003329
CREATED:20250220T000232Z
LAST-MODIFIED:20250902T184431Z
UID:10000071-1742468400-1742470200@saratech.com
SUMMARY:Mastering GAP Elements in Simcenter Femap
DESCRIPTION:This Event Has Expired\nPlease take a look at our upcoming events to register for our next enablement session. \nDiscover how to effectively use GAP elements in Simcenter Femap with James Kubli\, Femap Technical Specialist at Saratech. This session will cover how GAP elements function and how they can be leveraged in both compression and tension scenarios to enhance your simulation accuracy. \nWhy You Should Attend:\n\nUnderstand the function and definition of GAP elements\nLearn how to apply GAP elements in compression\nExplore the role of GAP elements in tension\n\nWhat To Expect:\n\nA comprehensive review of GAP elements and their behavior\nPractical applications and examples of GAP elements in simulations\nLive Q&A with James Kubli to address your questions\n\nWho Should Attend:\n\nFemap users looking to improve their analysis capabilities\nCAE and simulation engineers optimizing contact interactions\nAnyone working with nonlinear analysis in Simcenter Femap\n\n\n\n \n\nRegister to Watch On-Demand Now
URL:https://saratech.com/event/mastering-gap-elements-in-simcenter-femap/
LOCATION:GoTo Webinar
CATEGORIES:CES
ATTACH;FMTTYPE=image/jpeg:https://saratech.com/wp-content/uploads/2025/02/FB-1200x630-CES-Mastering-GAP-Elements-in-Simcenter-Femap.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20250220T110000
DTEND;TZID=America/Los_Angeles:20250220T113000
DTSTAMP:20260621T003329
CREATED:20250203T215002Z
LAST-MODIFIED:20250902T184320Z
UID:10000068-1740049200-1740051000@saratech.com
SUMMARY:Optimizing BOM Management & Alignment for Greater Efficiency
DESCRIPTION:This Event Has Expired\nPlease take a look at our upcoming events to register for our next enablement session. \nJoin us for an exclusive Customer Enablement Session (CES) with Adam Cassedy\, PLM Application Engineering Manager at Saratech. Learn essential techniques for effectively managing and aligning Bills of Materials (BOMs) within Teamcenter to improve accuracy\, reduce errors\, and streamline your product development process. \nWhy You Should Attend:\n\nLearn best practices for exporting and comparing BOMs\nUnderstand the differences between Design BOMs and Engineering BOMs\nDiscover strategies to align BOMs for greater efficiency and reduced rework\n\nWhat To Expect:\nBasic BOM Management \n\nHow to export a BOM to Excel\nBOM comparison in Active Workspace\nRevision rules and imprecise BOMs\n\nBOM Alignment \n\nUnderstanding Design and Engineering BOMs\nAligning Design BOMs with Engineering BOMs\nGenerating BOM alignment reports\n\nWho Should Attend:\n\nEngineering and manufacturing professionals\nPLM specialists\nBusiness leaders seeking better product lifecycle management and collaboration\n\n\n\n\n \n\nRegister to Watch On-Demand Now
URL:https://saratech.com/event/optimizing-bom-management-alignment-for-greater-efficiency/
LOCATION:GoTo Webinar
CATEGORIES:CES
ATTACH;FMTTYPE=image/jpeg:https://saratech.com/wp-content/uploads/2025/02/FB-1200x630-CES-Optimizing-BOM-Management-Alignment-for-Greater-Efficiency.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20250206T110000
DTEND;TZID=America/Los_Angeles:20250206T113000
DTSTAMP:20260621T003329
CREATED:20250115T174411Z
LAST-MODIFIED:20250902T184546Z
UID:10000067-1738839600-1738841400@saratech.com
SUMMARY:What's New in NX CAM 2412 for Manufacturing
DESCRIPTION:This Event Has Expired\nPlease take a look at our upcoming events to register for our next enablement session. \nExplore the latest enhancements in NX CAM 2412 with Mark Anderson\, Saratech’s Manufacturing Solutions Manager. Discover how new AI-driven functionality and cutting-edge programming tools are revolutionizing manufacturing processes. \nWhy You Should Attend:\n\nExplore NX X Manufacturing features that streamline production\nDiscover AI-driven functionalities to improve efficiency and precision\nLearn about automatic hole programming for faster machining setups\nUnderstand machine-powered programming solutions to simplify workflows\nGain insights into machine visualization\, MRL\, on-machine probing\, and more\n\nWhat To Expect:\n\nIn-depth exploration of NX CAM 2412’s newest features\nLive demonstrations of advanced programming solutions\nInteractive Q&A session to address your unique challenges\n\nWho Should Attend:\n\nManufacturing professionals seeking innovative machining solutions\nCNC programmers and operators looking to enhance productivity\nEngineers interested in leveraging AI for manufacturing efficiency\n\n\n\n \n\nRegister to Watch On-Demand Now
URL:https://saratech.com/event/whats-new-in-nxcam-2412-for-manufacturing/
LOCATION:GoTo Webinar
CATEGORIES:CES
ATTACH;FMTTYPE=image/jpeg:https://saratech.com/wp-content/uploads/2025/01/FB-1200x630-CES-Whats-New-in-NX-CAM-2412.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20250116T110000
DTEND;TZID=America/Los_Angeles:20250116T113000
DTSTAMP:20260621T003329
CREATED:20250106T225636Z
LAST-MODIFIED:20250903T164508Z
UID:10000066-1737025200-1737027000@saratech.com
SUMMARY:Breaking Down Siemens' Xcelerator Portfolio and How it Relates to Digital Transformation
DESCRIPTION:This Event Has Expired\nPlease take a look at our upcoming events to register for our next enablement session. \nJoin us for an exclusive CES (Customer Enablement Session)\, Breaking Down Siemens’ Xcelerator Portfolio and How it Relates to Digital Transformation\, with Saratech Application Engineer\, Blake Lipofsky. Gain insights into how Siemens Xcelerator’s innovative portfolio is helping businesses achieve a competitive edge through digital transformation. \nWhy You Should Attend:\n\nUnderstand what digital transformation means for your business\nExplore Siemens Xcelerator’s capabilities\, including Digital Twin and Digital Threads\nLearn from real-world success stories about the impact of digital transformation\n\nWhat To Expect:\n\nUnderstanding digital transformation and its drivers\nDetailed overview of Siemens Xcelerator\nInsights into its role in shaping the future of digital transformation\nCustomer success stories and interactive Q&A\n\nWho Should Attend:\n\nEngineering and manufacturing professionals seeking digital solutions\nIT and PLM specialists managing digital transformation initiatives\nBusiness leaders aiming to drive innovation and efficiency\n\n\n\n \nWatch this CES
URL:https://saratech.com/event/breaking-down-the-siemens-xcelerator-portfolio/
LOCATION:GoTo Webinar
CATEGORIES:CES
ATTACH;FMTTYPE=image/jpeg:https://saratech.com/wp-content/uploads/2025/01/FB-1200x630-CES-Breaking-Down-the-Siemens-Portfolio-2.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20241219T110000
DTEND;TZID=America/Los_Angeles:20241219T113000
DTSTAMP:20260621T003329
CREATED:20241127T173437Z
LAST-MODIFIED:20250903T164200Z
UID:10000065-1734606000-1734607800@saratech.com
SUMMARY:Introduction to NX Sheet Metal
DESCRIPTION:This Event Has Expired\nPlease take a look at our upcoming events to register for our next enablement session. \nAre you ready to master the fundamentals of NX Sheet Metal? Join us on Thursday\, 12/19 at 11AM PT for our next Customer Enablement Session: Introduction to NX Sheet Metal\, where you’ll learn how to streamline your sheet metal design process and unlock the potential of NX for your projects. \nWhat You’ll Learn:\n\nOverview of Sheet Metal Commands: Understand the modeling process from start to finish.\nCreating Initial Shapes: Explore the basics of cutouts and tabs.\nBending and Flattening Parts: Learn techniques for bending\, unbending\, and creating flat patterns.\nAdvanced Features: Add details like flanges\, deform features\, and more.\n\nWho Should Attend:\n\nMechanical Engineers\nDesign Engineers\nCAD Specialists\nManufacturing Engineers\nProduct Designers\n\n\n\n \nWatch this CES
URL:https://saratech.com/event/introduction-to-nx-sheet-metal/
LOCATION:GoTo Webinar
CATEGORIES:CES
ATTACH;FMTTYPE=image/jpeg:https://saratech.com/wp-content/uploads/2024/11/FB-1200x630-CES-Intro-to-Sheet-Metal.jpg
END:VEVENT
END:VCALENDAR