BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//Saratech - ECPv6.15.20//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-WR-CALNAME:Saratech
X-ORIGINAL-URL:https://saratech.com
X-WR-CALDESC:Events for Saratech
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:America/Los_Angeles
BEGIN:DAYLIGHT
TZOFFSETFROM:-0800
TZOFFSETTO:-0700
TZNAME:PDT
DTSTART:20220313T100000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0700
TZOFFSETTO:-0800
TZNAME:PST
DTSTART:20221106T090000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0800
TZOFFSETTO:-0700
TZNAME:PDT
DTSTART:20230312T100000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0700
TZOFFSETTO:-0800
TZNAME:PST
DTSTART:20231105T090000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0800
TZOFFSETTO:-0700
TZNAME:PDT
DTSTART:20240310T100000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0700
TZOFFSETTO:-0800
TZNAME:PST
DTSTART:20241103T090000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0800
TZOFFSETTO:-0700
TZNAME:PDT
DTSTART:20250309T100000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0700
TZOFFSETTO:-0800
TZNAME:PST
DTSTART:20251102T090000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20240606T110000
DTEND;TZID=America/Los_Angeles:20240606T113000
DTSTAMP:20260502T042042
CREATED:20240509T215817Z
LAST-MODIFIED:20250902T185217Z
UID:10002362-1717671600-1717673400@saratech.com
SUMMARY:Overcoming Nonlinear Contact Limitations: Exploring GAP Elements in Simcenter Femap On-Demand
DESCRIPTION:This Event Has Expired\nPlease take a look at our upcoming events to register for our next enablement session. \nJoin us for a practical session led by Saratech Femap Technical Specialist\, James Kubli\, P.E.\, where he’ll explore how GAP elements can be used to overcome the lack of contact simulation available in SOL106 and SOL129. This session is perfect for users of all experience levels\, especially those new to nonlinear analysis and without access to the multistep solvers (401/402). \nWhat You’ll Learn:\n\nWhy contact isn’t available in the basic nonlinear solvers.\nHow GAP elements act as nonlinear springs for contact simulation.\nSetting up both coincident and separated contact interfaces using GAP elements.\nUnderstanding the GAP property options and their functionalities.\nDiscussing the limitations of using GAP elements for contact simulation.\nLive demonstrations of setting up contact simulations with both coincident and separated geometries.\nPractical tips for handling convergence issues in nonlinear setups.\n\nWho Should Attend:\n\nSimcenter Femap users\nAll experience levels welcome\nSimcenter Femap users with no prior nonlinear experience\n\n\n\n \n\nRegister to Watch On-Demand Now
URL:https://saratech.com/event/overcoming-nonlinear-contact-limitations-exploring-gap-elements-in-simcenter-femap/
LOCATION:GoTo Webinar
CATEGORIES:CES
ATTACH;FMTTYPE=image/jpeg:https://saratech.com/wp-content/uploads/2024/05/CES-Overcoming-Nonlinear-Contact-Limitations-Exploring-GAP-Elements-in-Simcenter-Femap-FB-1200x630-1.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20240516T110000
DTEND;TZID=America/Los_Angeles:20240516T113000
DTSTAMP:20260502T042042
CREATED:20231223T044335Z
LAST-MODIFIED:20251112T180856Z
UID:10000041-1715857200-1715859000@saratech.com
SUMMARY:Teamcenter Deployment Center: Making Installation and Configuration a Breeze
DESCRIPTION:This Event Has Expired\nPlease take a look at our upcoming events to register for our next enablement session\, or visit our on-demand learning. \nLearn about Teamcenter deployment center and how to simplify installation and configuration. \nTopics:\n\nStreamlined Installation:\n\nDiscover the simplicity of installing Deployment Packs (DP) with Teamcenter DC. We’ll guide you through every step\, ensuring a smooth and efficient process.\n\n\nEfficient Multi-Server Configuration:\n\nLearn how to configure a multi-server environment effortlessly. Our session will cover setting up each server to install specific features tailored to your needs.\n\n\nUpgrade Mastery:\n\nConsidering an upgrade? This session will show you how to leverage deployment center to upgrade your Teamcenter environment.\n\n\n\nWho Should Attend:\n\nSystems engineers and IT professionals\nSoftware developers and engineers\nTechnical project managers\nTechnical consultants\nTeamcenter users
URL:https://saratech.com/event/teamcenter-deployment-center-making-installation-and-configuration-a-breeze/
LOCATION:GoTo Webinar
CATEGORIES:CES
ATTACH;FMTTYPE=image/jpeg:https://saratech.com/wp-content/uploads/2023/12/CES-Teamcenter-Deployment-Center-Making-Installation-Configuration-a-Breeze-FB-1200x630-2.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20240502T110000
DTEND;TZID=America/Los_Angeles:20240502T113000
DTSTAMP:20260502T042042
CREATED:20240412T161206Z
LAST-MODIFIED:20250904T000043Z
UID:10000049-1714647600-1714649400@saratech.com
SUMMARY:Using Splines in NX: The Math\, Vocabulary\, and Applications
DESCRIPTION:This Event Has Expired\nPlease take a look at our upcoming events to register for our next enablement session. \nJoin Saratech Senior Design Engineer\, Scott Hansel\, at our next CES to discuss splines\, in the context of NX software\, represent smooth and continuous curves formed through mathematical algorithms. These curves serve as pivotal elements in design and engineering\, offering a flexible means to create intricate shapes and surfaces with utmost precision. \nTopics:\n\nThe fundamental essence of splines and their pivotal role across industries.\nA simplified look into the mathematics behind splines.\nThe creation process of splines\, alongside an exploration of essential vocabulary encompassing points\, poles\, continuity\, and the determination of degree.\n\nWho Should Attend:\n\nNX Users\nDesigners and Engineers\n\n\n\n \n\nWatch this CES
URL:https://saratech.com/event/using-spines-in-nx/
LOCATION:GoTo Webinar
CATEGORIES:CES
ATTACH;FMTTYPE=image/jpeg:https://saratech.com/wp-content/uploads/2024/04/CES-Using-Splines-in-NX-The-Math-Vocabulary-Applications-FB-1200x630-1.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20240418T110000
DTEND;TZID=America/Los_Angeles:20240418T113000
DTSTAMP:20260502T042042
CREATED:20240401T213640Z
LAST-MODIFIED:20250903T235917Z
UID:10000048-1713438000-1713439800@saratech.com
SUMMARY:What's New in NX 2312
DESCRIPTION:This Event Has Expired\nPlease take a look at our upcoming events to register for our next enablement session. \nJoin special guest speaker\, Taylor Anderson\, from Siemens DISW on our next CES to discuss how NX provides a single solution that contains all the tools necessary to break down barriers between disciplines and enables engineers and designers to collaborate and share across entire product development workflow. \nTopics:\n\nNX on the cloud\nCollaboration\nMulti-disciplinary\nImmersive technology\nArtificial intelligence\n\nWho Should Attend:\n\nNX Users\nDesigners and Engineers\nManagers or NX Administrators\n\n\n\n \n\nWatch this CES
URL:https://saratech.com/event/whats-new-in-nx-2312/
LOCATION:GoTo Webinar
CATEGORIES:CES
ATTACH;FMTTYPE=image/jpeg:https://saratech.com/wp-content/uploads/2024/04/CES-Whats-New-in-NX-FB-1200x630-v2.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20240404T110000
DTEND;TZID=America/Los_Angeles:20240404T113000
DTSTAMP:20260502T042042
CREATED:20240216T183604Z
LAST-MODIFIED:20250902T184643Z
UID:10000044-1712228400-1712230200@saratech.com
SUMMARY:Understanding the NX Re-Use Library
DESCRIPTION:This Event Has Expired\nPlease take a look at our upcoming events to register for our next enablement session. \nThe NX Re-Use Library eliminates unnecessary duplication of efforts. It allows engineers to proactively focus on reuse through commonization\, standardization\, and modularity. NX Re-Use Library makes it easier to enforce company standards. \nTopics:\n\nHow to use the Re-Use library to locate geometry that already exists.\nHow to add standard hardware or geometry to the Re-Use library for others to use.\n\nWho Should Attend:\n\nNX Users\nDesigners and Engineers\nManagers or NX Administrators\n\n\n\n \n\nRegister to Watch On-Demand Now
URL:https://saratech.com/event/understanding-the-nx-reuse-library/
LOCATION:GoTo Webinar
CATEGORIES:CES
ATTACH;FMTTYPE=image/jpeg:https://saratech.com/wp-content/uploads/2024/02/CES-Understanding-the-NX-Reuse-Library-FB-1200x630-1.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20240326T110000
DTEND;TZID=America/Los_Angeles:20240326T114500
DTSTAMP:20260502T042042
CREATED:20240307T221251Z
LAST-MODIFIED:20250903T235810Z
UID:10000047-1711450800-1711453500@saratech.com
SUMMARY:Remove Manufacturing Bottlenecks with Proven Additive Manufacturing Technology
DESCRIPTION:This Event Has Expired\nPlease take a look at our upcoming events to register for our next enablement session. \nHave you experienced any of these issues in your manufacturing processes? \n\nUnplanned downtime due to lengthy procurement processes for replacement parts.\nDifficulty getting parts you need\, when you need them.\nLabor shortage – need to allocate expensive specialized labor towards fixtures\, tooling\, and other non-revenue generating activities.\nYour operation is too dependent on an unpredictable supply chain.\nLarge amounts of capital tied up in physical inventory and storage space.\n\nJoin engineering and 3D printing leaders Saratech and Markforged to learn how you can eliminate issues on your factory floor with the latest 3D printing technology. Enabling industrial production at the point of need.  \nIn this 45-minute webinar\, learn to: \n\nReduce lead times from months to mere hours by taking control of when to print your parts.\nLower costs by avoiding contracting expensive suppliers and by reducing the need to keep large inventories on hand.\nKeep your line up and running with more reliable supply chains and a new tool for innovative problem solving at a moment’s notice.\n\nExperts from Markforged and Saratech will show real-world case studies from companies across multiple industries including aerospace and industrial machinery.\n\n\n \n\nWatch this Webinar
URL:https://saratech.com/event/remove-manufacturing-bottlenecks-with-proven-additive-manufacturing-technology/
LOCATION:GoTo Webinar
CATEGORIES:Webinar
ATTACH;FMTTYPE=image/jpeg:https://saratech.com/wp-content/uploads/2024/03/Webinar-Remove-Manufacturing-Bottlenecks-with-Proven-Additive-Manufacturing-Technology-FB-1200x630-1.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20240321T110000
DTEND;TZID=America/Los_Angeles:20240321T113000
DTSTAMP:20260502T042042
CREATED:20240305T005153Z
LAST-MODIFIED:20250903T235631Z
UID:10000046-1711018800-1711020600@saratech.com
SUMMARY:NX CAM Variable Axis Programming: Projection Vector Options
DESCRIPTION:This Event Has Expired\nPlease take a look at our upcoming events to register for our next enablement session. \nJoin Mark Anderson\, Saratech Technical Manager of Manufacturing Solutions\, to learn about Projection Vector and how it affects NX’s ability to create tool paths. You will also learn how to apply the Projection Vectors efficiently to receive the desired tool path output and solutions to common Projection Vector errors. \nTopics:\n\nWhat is NX Projection Vector?\nHow to best apply Projection Vector\nProjection Vector options:\n\nTool Axis\nTool Axis Up\nAway from Point\nToward Point\nAway from Line\nToward Line\nNormal to Drive\nToward Drive\n\n\n\nWho Should Attend:\n\nNX CAM users\nManufacturing engineers\nAnyone who wants to learn more about NX CAM\n\n\n\n \n\nWatch this CES
URL:https://saratech.com/event/nx-cam-variable-axis-programming-projection-vector-options/
LOCATION:GoTo Webinar
CATEGORIES:CES
ATTACH;FMTTYPE=image/jpeg:https://saratech.com/wp-content/uploads/2024/03/CES-Variable-Axis-Programming-Understanding-Projection-Vector-Options-FB-1200x630-1.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20240307T110000
DTEND;TZID=America/Los_Angeles:20240307T113000
DTSTAMP:20260502T042042
CREATED:20231221T120106Z
LAST-MODIFIED:20251112T181011Z
UID:10000039-1709809200-1709811000@saratech.com
SUMMARY:What's New in Teamcenter 2312
DESCRIPTION:This Event Has Expired\nPlease take a look at our upcoming events to register for our next enablement session\, or visit our on-demand learning. \nJoin us to learn what’s new in Teamcenter 2312! \nTopics:\n\nTeamcenter Overview:​​​​​​\n\nIn-Depth Comparison with Teamcenter 14\nNew Features\n\nWho Should Attend:\n\nProduct Managers and Developers\nTeamcenter Users and Administrators\nDecision Makers and IT Professionals
URL:https://saratech.com/event/whats-new-in-teamcenter-2312/
LOCATION:GoTo Webinar
CATEGORIES:CES
ATTACH;FMTTYPE=image/jpeg:https://saratech.com/wp-content/uploads/2023/12/CES-Whats-New-in-Teamcenter-2312-FB-1200x630-2.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20240215T110000
DTEND;TZID=America/Los_Angeles:20240215T113000
DTSTAMP:20260502T042042
CREATED:20240201T235712Z
LAST-MODIFIED:20250903T235331Z
UID:10000043-1707994800-1707996600@saratech.com
SUMMARY:NX CAM Post Processor and ISV Kit Encryption
DESCRIPTION:This Event Has Expired\nPlease take a look at our upcoming events to register for our next enablement session. \nIn this session\, Mark Anderson\, Saratech Technical Manager of Manufacturing Solutions\, will address common misconceptions about NX CAM Post Processor and Integrated Simulation and Verification (ISV) Kit Encryption. \nTopics:\n\nWhat is encryption?\nHow does NX handle encryption?\nWhat does this mean to the customer for modifications and updates?\nWhat are layers?\n\nWho Should Attend:\n\nNX CAM users\nManufacturing engineers\nAnyone who wants to learn more about NX CAM\n\n\nJoin us to boost your knowledge of Siemens DISW NX CAM software. \n\n\n\n \n\nWatch this CES
URL:https://saratech.com/event/nx-cam-post-processor-and-isv-kit-encryption/
LOCATION:GoTo Webinar
CATEGORIES:CES
ATTACH;FMTTYPE=image/jpeg:https://saratech.com/wp-content/uploads/2024/02/CES-NX-CAM-Post-Processor-and-ISV-Kit-Encryption-FB-1200x630-1.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20240201T110000
DTEND;TZID=America/Los_Angeles:20240201T113000
DTSTAMP:20260502T042042
CREATED:20231215T201933Z
LAST-MODIFIED:20250903T235203Z
UID:10000038-1706785200-1706787000@saratech.com
SUMMARY:Top 5 Ways to Get Started With MBSE
DESCRIPTION:This Event Has Expired\nPlease take a look at our upcoming events to register for our next enablement session. \nJoin Us! Top 5 Ways to Get Started With MBSE \nYou Can Expect To Learn:\n\n\n\nPutting MBSE in the context of SE\n\nHow to Think about introducing MBSE as a change leadership initiative\n\nWays to introduce quick wins while introducing MBSE\n\n\n\n\n  \nWho Should Attend:\n\nManagers interested in MBSE and how to deploy it\nEngineers who want to emphasize the use of MBSE\nTeams who are tasked with using MBSE and need to know where to start\nNot for people making decisions on MBSE tools\n\nvery limited discussion of tools (unless you’re starting your   MBSE initiative by selecting a tool\, in which case we’ll be explaining why that’s a bad idea)\n\n\nAll Levels Welcome\n\nDr. Michael Ali is the SVP of Engineering Operations for Saratech\, an engineering services company located in Mission Viejo\, California.  His department is responsible for management\, analysis design\, and implementation of client projects.  Services ranging from product research and development to implementation and deployment of CAD and CAE systems. Prior to Saratech\, Dr. Ali served as CTO and/or CIO for Omega Engineering\, Grainger\, Harman\, and Jaguar and Land Rover\, as well as SVP of Applications for US Foods.  Prior to these roles\, he held various positions in Ford IT in Dearborn\, Michigan: Manager of Deskside Services\, Manager of Vehicle Line Systems\, and Manager of Product and manufacturing Design (CAD/CAM) Systems.  Prior to joining Ford\, he worked in management and engineering positions at General Electric\, Rensselaer Polytechnic Institute\, NASA\, and NIST.  He received his PhD in Computer and Systems Engineering from Rensselaer Polytechnic in 1999\, his Master’s in Mechanical Engineering from Stanford in 1986\, and his Bachelor of Science in Mechanical Engineering from Princeton in 1983. \n\n\n \n\nWatch this CES
URL:https://saratech.com/event/top-5-ways-to-get-started-with-mbse/
LOCATION:GoTo Webinar
CATEGORIES:CES
ATTACH;FMTTYPE=image/jpeg:https://saratech.com/wp-content/uploads/2023/12/CES-Top-5-Ways-to-Get-Started-With-MBSE-FB-1200x630-2.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20240118T110000
DTEND;TZID=America/Los_Angeles:20240118T113000
DTSTAMP:20260502T042042
CREATED:20240117T031208Z
LAST-MODIFIED:20250910T165003Z
UID:10000037-1705575600-1705577400@saratech.com
SUMMARY:Using Checkmate to Verify Models and Drawings in NX
DESCRIPTION:This Event Has Expired\nPlease take a look at our upcoming events to register for our next enablement session. \nJoin us to learn how to use Checkmate to verify models and drawings in NX! \nTopics:\n\nIntroduction to Checkmate: Understanding its role in model verification\nIntegrating Checkmate with NX: Seamless Workflow Approach\nTroubleshooting and Common Issues: Expert Q&A session\nAdvanced Techniques: Dive a bit deeper into some advanced applications and integration possibilities\n\nWho Should Attend:\n\nMechanical and Design Engineers\nCAD/CAM Technicians\nManufacturing Engineers\nNX users looking to incorporate Checkmate\nAll Levels Welcome\n\n\n\n \n\nRegister to Watch On-Demand Now
URL:https://saratech.com/event/using-checkmate-to-verify-models-and-drawings-in-nx/
LOCATION:GoTo Webinar
CATEGORIES:CES
ATTACH;FMTTYPE=image/jpeg:https://saratech.com/wp-content/uploads/2023/12/CES-Using-Checkmate-To-Verify-Models-and-Drawings-in-NX-FB-1200x630-1.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20240104T110000
DTEND;TZID=America/Los_Angeles:20240104T113000
DTSTAMP:20260502T042042
CREATED:20231205T003930Z
LAST-MODIFIED:20250910T164742Z
UID:10000035-1704366000-1704367800@saratech.com
SUMMARY:More NX Sketcher Tips You May Not Know
DESCRIPTION:This Event Has Expired\nPlease take a look at our upcoming events to register for our next enablement session. \nJoin us on January 4th at 11:00 AM Pacific Time for a refresher on all things NX Sketcher! All levels are welcome. \nTopics:\n\nConstraints\, Dimensions\, and Expressions: Learn how to effectively apply constraints and expressions to bring precision to your sketches.\nSpline and Curve Creation: Explore the art of creating and manipulating splines and curves\, and master the control you need for intricate designs.\nProjection and Intersection Curves: Discover the power of using projection and intersection curves to enhance the complexity and accuracy of your sketches.\nPattern and Mirror Operations: Get a comprehensive overview of pattern and mirror operations within NX Sketch to streamline your design process.\nAdvanced Techniques: Dive a bit deeper into some advanced applications and integration possibilities\n\nWho Should Attend:\n\nMechanical and Design Engineers\nCAD/CAM Technicians\nManufacturing Engineers\nProduct Designers\nAll Levels Welcome\n\n\n\n \n\nWatch this CES
URL:https://saratech.com/event/nx-sketcher-part-two/
LOCATION:GoTo Webinar
CATEGORIES:CES
ATTACH;FMTTYPE=image/jpeg:https://saratech.com/wp-content/uploads/2023/12/CES-More-NX-Sketcher-Tips-You-May-Not-Know-FB-1200x630-1.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20231221T110000
DTEND;TZID=America/Los_Angeles:20231221T113000
DTSTAMP:20260502T042042
CREATED:20230916T043351Z
LAST-MODIFIED:20250910T164457Z
UID:10000031-1703156400-1703158200@saratech.com
SUMMARY:Variable Contour in NX
DESCRIPTION:This Event Has Expired\nPlease take a look at our upcoming events to register for our next enablement session. \nUnlock the full potential of NX: Dive into the world of variable contour at our exclusive customer enablement session. \nTopics:\n\nIntroduction to Variable Contour: Understand the basics and significance of this feature in NX.\nHands-on Demonstration: Watch our experts showcase the application and benefits of variable contour in real time.\nBest Practices: Learn the do’s and don’ts to ensure optimal usage and results.\nQ&A Session: This is your chance to ask any questions or clarify doubts directly with our team.\nAdvanced Techniques: Dive a bit deeper into some advanced applications and integration possibilities\n\nWho Should Attend:\n\nDesign Engineers\nCAD/CAM Technicians\nManufacturing Engineers\nProject Managers\nAll Levels Welcome\n\n\n\n \n\nRegister to Watch On-Demand Now
URL:https://saratech.com/event/variable-contour-in-nx/
LOCATION:GoTo Webinar
CATEGORIES:CES
ATTACH;FMTTYPE=image/jpeg:https://saratech.com/wp-content/uploads/2023/09/CES-Variable-Contour-in-NX-CAM-FB-1200x630-1.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20231207T110000
DTEND;TZID=America/Los_Angeles:20231207T113000
DTSTAMP:20260502T042042
CREATED:20230818T014227Z
LAST-MODIFIED:20250910T164219Z
UID:10000030-1701946800-1701948600@saratech.com
SUMMARY:How to Create a Custom Tile in Active Workspace
DESCRIPTION:This Event Has Expired\nPlease take a look at our upcoming events to register for our next enablement session. \nTopics:\n\nActive Workspace Intro and Customization: Overview of AWS and the importance of customization\nCustom Tile Creation Essentials: Explanation and benefits of custom tiles\nTools\, resources\, and development environment setup: Creating Effective Tiles\nStep-by-step guide for basic tile creation: Integration engineering data and information display\nAdvanced Features and Behavior: Adding interactivity and dynamic updates\nDefining tile behavior based on user interactions: Deployment and Best Practices\nDeploying custom tiles\, user access management: Tips for user-friendly and optimized tile development\n\nWho Should Attend:\n\nThis CES is designed for engineers\, designers\, and product lifecycle management professionals interested in optimizing Teamcenter\n\n\n\n \n\nRegister to Watch On-Demand Now
URL:https://saratech.com/event/how-to-create-a-custom-tile-in-active-workspace/
LOCATION:GoTo Webinar
CATEGORIES:CES
ATTACH;FMTTYPE=image/jpeg:https://saratech.com/wp-content/uploads/2023/08/CES-How-To-Create-a-Custom-Tile-in-Active-Workspace-FB-1200x630-2.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20231116T110000
DTEND;TZID=America/Los_Angeles:20231116T113000
DTSTAMP:20260502T042042
CREATED:20231108T020642Z
LAST-MODIFIED:20250910T163635Z
UID:10000034-1700132400-1700134200@saratech.com
SUMMARY:Getting to Know Simcenter Femap Custom Tools
DESCRIPTION:This Event Has Expired\nPlease take a look at our upcoming events to register for our next enablement session. \nGet hands-on experience and in-depth knowledge about custom Simcenter Femap tools that can transform the way you approach complex engineering challenges. \nTopics:\n\nIntroduction to Custom Tools: Discover the vast array of custom tools within Simcenter Femap that can streamline your workflow.\nAdvanced Modeling Techniques: Learn how to enhance your models for more accurate simulations.\nAutomation Secrets:Uncover tips and tricks to automate repetitive tasks\, saving you time and effort.\nTroubleshooting Common Issues: Equip yourself with strategies to solve frequent challenges encountered with custom tools.\n\nWho Should Attend:\n\nSimcenter Femap Users\nAll Levels Welcome\n\n\n\n \n\nWatch this CES
URL:https://saratech.com/event/getting-to-know-femap-custom-tools/
LOCATION:GoTo Webinar
CATEGORIES:CES
ATTACH;FMTTYPE=image/jpeg:https://saratech.com/wp-content/uploads/2023/11/CES-Getting-To-Know-Femap-Custom-Tools-FB-1200x630-1.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20231114T110000
DTEND;TZID=America/Los_Angeles:20231114T114500
DTSTAMP:20260502T042042
CREATED:20231012T000337Z
LAST-MODIFIED:20250910T162802Z
UID:10000033-1699959600-1699962300@saratech.com
SUMMARY:Speed Up Your Production in Aerospace and Defense With Proven 3D Printing Technology
DESCRIPTION:This Event Has Expired\nPlease take a look at our upcoming events. \nJoin us on November 14th at 11:00 AM PT to explore the transformative power of 3D printing in Aerospace and Defense. \nLearn from Melissa Lavey about the latest innovations from Markforged\, and learn from Brian Geary of Stretch Forming Corporation how an unexpected collaboration took their production time from 12 weeks to just one. \nTopics:\n\nReplacing Machining with 3D Printing: Reduce lead time and produce flight-ready components.\nMarkforged Solutions: Metal & Composite AM systems; Analysis & In-Process Inspection software; Lot-Level Traceable materials\nBetter Inventory Management: Reduce on-shelf inventory with 3D-printed parts on demand.\nCase Study with Stretch Forming Corporation: Listen as Stretch Forming Corporation shares the secret to successfully delivering test units for the re-engine package well within the required deadline.\n\nWho Should Attend:\n\nEngineers and Innovators\nIndustry Decision-Makers\nAerospace and Defense Professionals\nTechnology and Manufacturing Experts\n\n\n\n \n\nWatch this Webinar
URL:https://saratech.com/event/speed-up-your-production-in-aerospace-and-defense-with-proven-3d-printing-technology/
LOCATION:GoTo Webinar
CATEGORIES:Webinar
ATTACH;FMTTYPE=image/webp:https://saratech.com/wp-content/uploads/2023/10/Webinar-Speed-Up-Your-Production-in-Aerospace-and-Defense-With-Proven-3D-Printing-Technology-FB-1200x630-1.webp
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20231102T110000
DTEND;TZID=America/Los_Angeles:20231102T113000
DTSTAMP:20260502T042042
CREATED:20231003T060626Z
LAST-MODIFIED:20250910T162046Z
UID:10000032-1698922800-1698924600@saratech.com
SUMMARY:Value-Based Licensing in NX
DESCRIPTION:This Event Has Expired\nPlease take a look at our upcoming events to register for our next enablement session. \nEmbark on a journey with Saratech at our upcoming Customer Enablement Session on November 2nd at 11:00 AM PT\, where we demystify the substantive benefits of value-based licensing in NX! \nKey Take-Aways:\n\nPractical Understanding: Learn the simplified and practical aspects of value-based licensing.\n\nStrategic Cost Control: Learn how to implement strategies that not only save costs but also enhance efficiency.\n\nFlexible Project Environments: Understand how to establish a more adaptable and nimble project framework.\n\nWho Should Attend:\nEngineers\, Product Designers\, Project Managers\, and IT Administrators keen on refining their software investments\, increasing operational flexibility\, and guiding their teams toward utilizing NX in a strategic and value-driven manner are encouraged to attend.\n\n\n \n\nWatch this CES
URL:https://saratech.com/event/value-based-licensing-in-nx/
LOCATION:GoTo Webinar
CATEGORIES:CES
ATTACH;FMTTYPE=image/jpeg:https://saratech.com/wp-content/uploads/2023/10/CES-Value-Based-Licensing-in-NX-FB-1200x630-1.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20231019T110000
DTEND;TZID=America/Los_Angeles:20231019T113000
DTSTAMP:20260502T042042
CREATED:20230810T044803Z
LAST-MODIFIED:20250910T163003Z
UID:10000028-1697713200-1697715000@saratech.com
SUMMARY:Teamcenter Integration: CAE Data Management
DESCRIPTION:This Event Has Expired\nPlease take a look at our upcoming events to register for our next enablement session. \nJoin us on October 19th\, 2023\, at 11:00 AM PT to learn how to integrate Teamcenter with CAE data management processes. \nThis customer enablement session focuses on integrating Teamcenter\, a leading Product Lifecycle Management (PLM) system\, with Computer-Aided Engineering (CAE) data management processes. The session will explore how to effectively manage and streamline CAE data within the Teamcenter environment\, enhancing collaboration\, data traceability\, and overall efficiency in the product development lifecycle. \nTopics:\n\nDigital Thread – Data Management\nTeamcenter Integration with Simcenter FEMAP\nFiles from Simcenter FEMAP managed within the Teamcenter environment\nDatasets can be checked in and out for configuration control.\nDocumented revision history\n\nWho Should Attend:\n\nCAE Engineers\nPLM Administrators\nManufacturing Managers\nProduct Managers\n\n\n\n \n\nWatch this CES
URL:https://saratech.com/event/teamcenter-integration-cae-data-management/
LOCATION:GoTo Webinar
CATEGORIES:CES
ATTACH;FMTTYPE=image/jpeg:https://saratech.com/wp-content/uploads/2023/08/CES-Teamcenter-Integration-CAE-Data-Management-FB-1200x630-1.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20231005T110000
DTEND;TZID=America/Los_Angeles:20231005T113000
DTSTAMP:20260502T042042
CREATED:20230714T172045Z
LAST-MODIFIED:20250910T163043Z
UID:10000024-1696503600-1696505400@saratech.com
SUMMARY:NX CAM and Using Post-Hub: With Examples
DESCRIPTION:This Event Has Expired\nPlease take a look at our upcoming events to register for our next enablement session. \nJoin us on October 5th\, 2023\, at 11:00 AM PT to learn how to utilize Post-Hub within NX CAM. \nLearn how to use NX CAM and Post-Hub to optimize manufacturing processes and improve accuracy and quality. \nTopics:\n\nIntroduction to NX CAM and Post-Hub\nToolpath generation\nAdvanced CAM strategies: high-speed machining\, multi-axis machining\, and adaptive milling\nPost-processing challenges and how to overcome them using Post-Hub\nDemonstration of Post-Hub’s automation features\nWorkflow integration between NX CAM and Post-Hub\n\nWho Should Attend:\n\nManufacturing Engineers\nCNC Programmers\nManufacturing Managers\nStudents and Educators\nMachinists and Operators\n\n\n\n \n\nWatch this CES
URL:https://saratech.com/event/nx-cam-and-using-posthub-with-examples/
LOCATION:GoTo Webinar
CATEGORIES:CES
ATTACH;FMTTYPE=image/jpeg:https://saratech.com/wp-content/uploads/2023/07/CES-NX-CAM-and-Using-Post-Hub-With-Examples-FB-1200x630-1.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20230927T100000
DTEND;TZID=America/Los_Angeles:20230927T120000
DTSTAMP:20260502T042042
CREATED:20230816T043642Z
LAST-MODIFIED:20250910T163131Z
UID:10000029-1695808800-1695816000@saratech.com
SUMMARY:Drive the Aerospace and Defense Industry Forward with the Proven Power of 3D Printing
DESCRIPTION:This Event Has Expired\nPlease take a look at our upcoming events. \nJoin us on September 27th at 10:00 AM PT at Saratech Headquarters in Mission Viejo to explore the transformative power of 3D printing in Aerospace and Defense. \nMelissa Lavey from Markforged will join us to go into topics such as Markforged’s state-of-the-art analysis and in-situ inspection software offerings for part validation\, verification\, and quality control. Learn about the Onyx FR-A and Carbon Fiber FR-A NCAMP Qualification efforts paving the way to countless advancements in the A&D industry. We will also look at applications for tooling and fly-away parts using both metal and composite technology\, with flight and space hardware examples. \nTopics:\n\nReplacing Machining with 3D Printing: Reduce lead time and produce flight-ready components.\nMarkforged Solutions: Metal & Composite AM systems; Analysis & In-Process Inspection software; Lot-Level Traceable materials\nBetter Inventory Management: Reduce on-shelf inventory with 3D-printed parts on demand.\nCustomer Examples:  Hear success stories directly from our customer Stretch Forming Corporation\nNetworking: Engage with experts and peers.\n\nWho Should Attend:\n\nEngineers and Innovators\nIndustry Decision-Makers\nAerospace and Defense Professionals\nTechnology and Manufacturing Experts
URL:https://saratech.com/event/drive-the-aerospace-and-defense-industry-forward-with-the-proven-power-of-3d-printing/
LOCATION:Saratech Headquarters\, 26054 Acero\, Mission Viejo\, CA\, 92691
CATEGORIES:Live Event
ATTACH;FMTTYPE=image/jpeg:https://saratech.com/wp-content/uploads/2023/08/Live-Event-Aerospace-Defense-3D-Printing-FB-1200x630-1.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20230921T110000
DTEND;TZID=America/Los_Angeles:20230921T113000
DTSTAMP:20260502T042042
CREATED:20230701T024443Z
LAST-MODIFIED:20250909T235548Z
UID:10000021-1695294000-1695295800@saratech.com
SUMMARY:Simcenter Femap: Layup Manager
DESCRIPTION:This Event Has Expired\nPlease take a look at our upcoming events to register for our next enablement session. \nJoin us for this informative Customer Enablement Session on Simcenter Femap Layup Manager to unlock the full potential of composite modeling and analysis in Simcenter Femap. \nSession Topics: \n\nIntroduction to Simcenter Femap Layup Manager\nComposite Material Modeling:\nCreating Composite Layups\nComposite Analysis and Post-processing\nOptimization and Design Exploration\nWorkflow Integration and Collaboration\n\nThis customer enablement session is designed for engineers and analysts who work with composite materials and structures. As well as designers and manufacturers involved in the aerospace\, automotive\, and other industries where composites are extensively used and individuals interested in exploring the advanced capabilities of Simcenter Femap for composite modeling and analysis.\n\n\n \n\nWatch this CES
URL:https://saratech.com/event/simcenter-femap-layup-manager/
LOCATION:GoTo Webinar
CATEGORIES:CES
ATTACH;FMTTYPE=image/jpeg:https://saratech.com/wp-content/uploads/2023/06/CES-Simcenter-Femap-Layup-Manager-FB-1200x630-1.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20230907T110000
DTEND;TZID=America/Los_Angeles:20230907T113000
DTSTAMP:20260502T042042
CREATED:20230629T002125Z
LAST-MODIFIED:20251112T180610Z
UID:10000005-1694084400-1694086200@saratech.com
SUMMARY:How to Leverage NX\, Teamcenter\, and Active Workspace Integration to Manage Your Workflow
DESCRIPTION:This Event Has Expired\nPlease take a look at our upcoming events to register for our next enablement session. \nDiscover the seamless integration of NX and Teamcenter in this insightful Customer Enablement Session as we delve into the powerful synergy between these industry-leading software solutions\, unlocking enhanced collaboration\, efficiency\, and productivity for your engineering and product lifecycle management processes. Join us to explore the unparalleled benefits of this integrated ecosystem and harness its potential for your organization’s success. \nTopics: \n\nHow to open an NX batch file that includes Teamcenter integration\nHow to make sure Teamcenter and Active Workspace are integrated and connected\nA look at the Active Workspace interface\nHow to create a new item and part in NX\nGo from Active Workspace submission to the workflow process\nFinishing the workflow process\, reviewing that the item revision is released and shows a new status\n\nThis customer enablement session is designed for engineers\, designers\, and product lifecycle management professionals interested in optimizing NX and Teamcenter integration. \n\n\n \n\nWatch this CES
URL:https://saratech.com/event/how-nx-and-teamcenter-are-integrated/
LOCATION:GoTo Webinar
CATEGORIES:CES
ATTACH;FMTTYPE=image/jpeg:https://saratech.com/wp-content/uploads/2023/06/CES-How-NX-and-Teamcenter-are-Integrated-FB-1200x630-2.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20230822T110000
DTEND;TZID=America/Los_Angeles:20230822T114500
DTSTAMP:20260502T042042
CREATED:20230803T005642Z
LAST-MODIFIED:20250909T235131Z
UID:10000025-1692702000-1692704700@saratech.com
SUMMARY:How to Prepare and Optimize Your Parts for 3D Printing
DESCRIPTION:This Event Has Expired\nPlease take a look at our upcoming events. \nJoin Saratech and special guest speaker\, Alec Warda from Materialise\, to learn how to properly prepare and optimize your parts for 3D printing. \nLearn to solve 3D printing issues such as: \n\nNot maximizing print volume\nGaps\, holes\, geometric inconsistencies\nImproper wall thickness\nImproper support structures\nPart orientation problems\nScaling or joining parts\n\nWho should Attend \n\n3D Printing engineers\nDesigners\nManufacturing engineers\nProfessionals involved with 3D printing or manufacturing\nProfessionals investigating 3D printing technologies\n\n\n\n \n\nWatch this Webinar
URL:https://saratech.com/event/how-to-prepare-and-optimize-your-parts-for-3d-printing/
LOCATION:GoTo Webinar
CATEGORIES:Webinar
ATTACH;FMTTYPE=image/jpeg:https://saratech.com/wp-content/uploads/2023/08/Webinar-How-to-Prepare-and-Optimize-Your-Parts-for-3D-Printing-FB-1200x630-1.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20230817T110000
DTEND;TZID=America/Los_Angeles:20230817T113000
DTSTAMP:20260502T042042
CREATED:20230629T002113Z
LAST-MODIFIED:20250909T235035Z
UID:10000002-1692270000-1692271800@saratech.com
SUMMARY:Setting Up an Assembly FEM in Simcenter 3D
DESCRIPTION:This Event Has Expired\nPlease take a look at our upcoming events to register for our next enablement session. \nDiscover the Magic of Assembly FEMs: \nAn Assembly FEM (AFEM) is a game-changer in the world of software engineering. It allows you to assemble individual FEMs that reference their respective CAD files within an assembly CAD file. This revolutionary capability empowers you to generate component-level FEMs\, which can later be seamlessly combined into a comprehensive assembly FEM\, similar to the CAD assembly itself. \nWhat You’ll Learn: \n\nIn this customer enablement session\, we will dive deep into the world of Assembly FEMs\, providing you with a comprehensive understanding of their functionality and benefits. Our expert facilitators will cover the following topics:\nWhat is an Assembly FEM? Gain insights into the concept of Assembly FEMs and their significance in the design and analysis process. Understand how Assembly FEMs reference individual CAD files within an assembly\, allowing for greater flexibility and efficiency.\nSetting Up an Assembly FEM: Learn step-by-step how to set up an Assembly FEM within your Siemens software. Discover best practices for organizing and managing multiple component-level FEMs within an assembly\, ensuring a streamlined and systematic approach.\nConnections Between Multiple FEMs: Explore the intricate connections that can be established between different FEMs within an assembly. Unleash the potential of seamlessly integrating component-level FEMs into a single\, cohesive Assembly FEM\, facilitating accurate simulations and evaluations.\n\nWhy Attend: \nBy participating in this customer enablement session\, you will: \n\nGain a comprehensive understanding of Assembly FEMs and their advantages in your software engineering workflow.\nLearn practical techniques and strategies for setting up Assembly FEMs within your Siemens software.\nMaster the art of establishing connections between multiple FEMs within an assembly for accurate simulations and evaluations.\nEnhance your productivity and efficiency\, reducing time-to-market and optimizing your software engineering process.\n\n\n\n \n\nWatch this CES
URL:https://saratech.com/event/setting-up-an-assembly-fem-in-simcenter-3d/
LOCATION:GoTo Webinar
CATEGORIES:CES
ATTACH;FMTTYPE=image/jpeg:https://saratech.com/wp-content/uploads/2023/06/CES-Assembly-FEM-in-Simcenter-3D-FB-1200x630-1.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20230803T110000
DTEND;TZID=America/Los_Angeles:20230803T113000
DTSTAMP:20260502T042042
CREATED:20230705T050731Z
LAST-MODIFIED:20250909T234925Z
UID:10000023-1691060400-1691062200@saratech.com
SUMMARY:Top-Down Design and Wave-Linking in NX
DESCRIPTION:This Event Has Expired\nPlease take a look at our upcoming events to register for our next enablement session. \nTopics: \n\nIntroduction to top-down design: streamline complex assemblies\, optimize collaboration\, and capture design efficiently\nMaster model concept: control design changes\, manage interpart relationships\, and ensure assembly consistency\nAssembly constraints and Interpart relationships: establish dynamic relationships and constraints between components\, saving time and effort\nWave-linking: efficiently propagate design changes across related components\nBest practices for top-down design: enhance collaboration\, design quality\, and element reuse with proven strategies\n\nWho should Attend \n\nDesign engineers\nEngineering managers\nCAD administrators\nProduct managers\n\n\n\n \nWatch this CES
URL:https://saratech.com/event/top-down-design-and-wave-linking-in-nx-2/
LOCATION:GoTo Webinar
CATEGORIES:CES
ATTACH;FMTTYPE=image/jpeg:https://saratech.com/wp-content/uploads/2023/07/CES-Top-Down-Design-and-Wave-Linking-in-NX-FB-1200x630-1.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20230720T110000
DTEND;TZID=America/Los_Angeles:20230720T114500
DTSTAMP:20260502T042042
CREATED:20230703T201723Z
LAST-MODIFIED:20250909T234808Z
UID:10000022-1689850800-1689853500@saratech.com
SUMMARY:Measuring Product Sustainable Impact in Your Design Process with NX
DESCRIPTION:This Event Has Expired\nPlease take a look at our upcoming events to register for our next enablement session. \nNX has introduced a new sustainable impact module that will allow designers the transparency to see the environmental impact of their design choices. Join us on July 20th to see how you can utilize this powerful tool. Don’t miss out\, save your seat today. \nWhat you’ll learn:\n\nManaging and characterizing materials in NX\nCreating a sustainability impact analysis report in NX\nInterpreting and navigating reports\nIntegrating and working with Teamcenter Integrated Materials Management (IMM) workflows\nDemonstration of the new sustainable impact module\n\nWho Should Attend – NX users who want to learn:\n\nCurrent trends and challenges\nCreating a sustainability impact analysis report in NX\nBenefits of using NX for sustainability\nOverview of NX for sustainability\n\n\n\n \nWatch this CES
URL:https://saratech.com/event/measuring-product-sustainable-impact-in-your-design-process-with-nx/
LOCATION:GoTo Webinar
CATEGORIES:CES
ATTACH;FMTTYPE=image/jpeg:https://saratech.com/wp-content/uploads/2023/07/CES-Measuring-product-sustainable-impact-with-NX-LinkedIn-1200x628-1.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20230712T110000
DTEND;TZID=America/Los_Angeles:20230712T114500
DTSTAMP:20260502T042042
CREATED:20230629T210307Z
LAST-MODIFIED:20250909T234710Z
UID:10000020-1689159600-1689162300@saratech.com
SUMMARY:Navigating Additive Manufacturing Materials: Avoiding Costly Mistakes in Material Selection
DESCRIPTION:This Event Has Expired\nPlease take a look at our upcoming events. \nJoin us on July 12th at 11:00 AM PDT and go beyond hobbyist 3D printing. Learn how to select the perfect materials for your specific needs and unlock the true potential of additive manufacturing. \nWhat you’ll learn: \n\nChoosing the Right Material for Your 3D Printing Applications\nEnhancing Efficiency with Injection Molding Alternatives\nAchieving Strength and Flexibility\n\nChoosing the Right Material for Your 3D Printing Applications\nDiscover a wide range of engineering materials available for additive manufacturing. We’ll go beyond printing hard plastic toys and highlight how ultra-high-strength composites and tailored materials can be utilized in industries such as automotive\, aerospace\, consumer products\, and more. \nEnhancing Efficiency with Injection Molding Alternatives\nExplore the advantages of materials like Nylon and MJF (Multi Jet Fusion) as alternatives to traditional injection molding. Learn how 3D printing with these materials can save costs and eliminate the need for expensive injection molds in industries like construction\, watercraft\, and consumer products. \nAchieving Strength and Flexibility\nDiscover the applications of TPU (Thermoplastic Polyurethane) in creating flexible parts such as belts and gaskets\, benefiting industries like automotive\, aerospace\, and construction. TPU’s unique properties\, including soft malleability and chemical resistance\, make it ideal for specific use cases \nAdditionally\, we’ll touch upon the versatility of PLA (Polylactic Acid)\, a classic material suitable for rapid prototyping and testing parts across various industries. We’ll also highlight the chemical resistance properties of materials like Polypropylene\, emphasizing their applications in industries such as automotive and consumer products. \n\n\n \nWatch the Webinar
URL:https://saratech.com/event/navigating-additive-manufacturing-materials-avoiding-costly-mistakes-in-material-selection/
LOCATION:GoTo Webinar
CATEGORIES:Webinar
ATTACH;FMTTYPE=image/jpeg:https://saratech.com/wp-content/uploads/2023/06/Webinar-Navigating-Additive-Manufacturing-Materials-FB-1200x630-1.jpg
END:VEVENT
END:VCALENDAR