Helping Companies Optimize Product Development and Manufacturing

July 12, 2019
FEMAP freebody: Global vs Local thumbnail

FEMAP Freebody Tool

FEMAP’s Freebody tool is essential for users that have large models but at the same time have to analyze more localized structures. With this tool, users can quickly create a load from a global model analysis set and insert that load into a local model for a more detailed and finer mesh analysis.
June 28, 2019
NX Convergent Local Offset

NX 12: Convergent Local Offset

In this week’s short tutorial we are going to be reviewing local offsets and reverse engineering in Siemens NX 12.
June 13, 2019
Femap 2019.1 Release thumbnail

FEMAP 2019.1 Release

Delve into the latest features from FEMAP 2019.1 and get faster solutions to the toughest challenges with world-renowned engineering simulation capabilities. FEMAP 2019.1 includes updated icons, […]
May 31, 2019
Simcenter Non-Linear Materials Thumbnail

Simcenter 3D: Non-Linear Materials

In this short tutorial, we are going to be reviewing Non-Linear Materials in Simcenter 3D (NX CAE). Throughout this demonstration, we are going to be using 4340 steel to discuss what happens after the material has yielded.
April 26, 2019
Modal Analysis Thumbnail

Modal Analysis in Simcenter 3D

  Bike Frame Modal Analysis in Simcenter 3D Modal analysis is the study of the various dynamic properties within the frequency domain. Modal analysis can often […]
April 12, 2019
Sheet Metal Enhancement Thumbnail

NX 12: Sheet Metal Enhancement

  Sheet Metal Enhancement In this week’s short tutorial, application engineer Chad Evans will be reviewing flattening, forming & sheet metal enhancements in NX 12. Sheet […]
March 22, 2019
Femap 12 Meshing Toolbox

Femap 12: Meshing Toolbox

Introduction to the Meshing Toolbox in Femap 12 Explore the many functionalities within the Femap 12 meshing toolbox! This short FEMAP tutorial explores how to prepare […]
March 15, 2019
Simcenter: Cleanup Geometry in Idealized Part

Simcenter: Cleanup Geometry in Idealized Part

In this week’s YouTube tutorial, we present a few methods and techniques pertaining to geometry cleanup in an idealized part in Simcenter. Geometry cleanup in an idealized part is done in order to simplify and optimize geometry prior to meshing which helps to avoid issues later on in the process.
March 8, 2019
Exporting Results in Femap

Exporting Results in Femap

Exporting Results using Femap’s Data Table In this week’s “Tips & Tricks” tutorial we will be exhibiting how to export results using Femap’s data tables into […]
Contact Us
close slider

CAPTCHA image